RCA L32WD12 manual VGA Connection, Viewing the PC

Connections and Setup

VGA Connection

This is an example of a connection using the VGA jacks.

1

Don't forget: If necessary, connect antenna or cable to get a picture. Go to page 6 for instructions.

VIDEO

VGA

AUDIO

2

3

Connecting the Device

This connection allows you to connect to a personal computer.

1.If necessary, connect your cable and/or off-air antenna as described on page 6.

2.Connect your monitor cable.

Connect one end of a 15-pin monitor cable to the VGA VIDEO jack on the TV and the other end to the PC's video output jack. Note, if your PC's video output isn't 15-pin, you'll need an adapter that can connect to a 15-pin monitor cable.

3.Connect your audio cable.

Connect a 3.5 mm stereo mini pin cable (sometimes referred to as 1/8" stereo mini pin) to the VGA AUDIO jack on the back of the TV and the other end to the Audio Output jack on the PC.

Notes: The maximum panel resolution is 1366 x 768. Be sure to set your PC to the correct monitor output setting.

The MultiTask Audio™ feature allows you to listen to the sound from the TV while the PC is connected. Go to page 24 for more information.

Viewing the PC

1.Plug in the TV (see page 13 for details) and the PC, if they aren't already plugged in.

2.Turn on the TV and the PC.

3.Press the INPUT button on the remote control to scroll through the Video Input Channels until you see VGA displayed at the bottom of the TV's screen. To go back to viewing TV channels, press the ANTENNA button.

12

1665105B.indb 12

Chapter 1

2/17/06 6:31:45 PM