Reference
Can’t select certain channel
•Channel may be blocked or not approved in the Parental Controls menu.
•If using a VCR, check to make sure the TV/VCR button on the VCR is in the correct “mode.”
•Maybe the Reception: Cable/Air setting is set to the wrong position. Check the Reception: Cable/Air setting in the
No picture, no sound but TV is on
•Maybe a vacant channel is tuned.
•If watching VCR (connected only through antenna input), make sure TV is tuned to channel 3 or
•Maybe the Reception: Cable/Air setting is set to the wrong position. Check the Reception: Cable/Air setting in the
Sound okay, picture poor
•Check antenna connections.
•Try adjusting sharpness function to improve weak signals.
Black box appears on the screen
•Captioning may be turned on and set to a mode that is not available. Check the CC feature in the Special menu.
Care and Cleaning
CAUTION: Turn OFF your TV before cleaning.
You can clean the TV as required, using a soft
The TV’s screen may be cleaned with a soft,
Never use strong cleaning agents, such as
While cleaning do not spray liquid directly on the screen, or allow liquid to run down the screen and inside the TV. Also, avoid placing drinks or vases with water on top of the TV. This could increase the risk of fire or shock hazard or damage to the TV.
Caution: If fixed
28 | Chapter 3 |