Operation
3M™ Drive-Thru Systems Model G5 and Model XT-1
Operating Instructions
November 6 2014 – Revision 2.1
Page 39 of 77
Out of Range
In addition to “Change Battery Now” you may also hear a message for “Out of
Range.” If you hear this in your headset, it means the headset has lost
synchronization with the basestation and that you need to move the headset
closer to the Base Station. You will know you are in range when you hear the
message “Lane 1” or “Lane 2.”
Cleaning
For good health and hygiene, you should clean the headsets regularly. Here are
some guidelines:
•
Check the headsets every day. If they are dirty, clean them. Even if
they don’t look dirty, every headset should be cleaned on a regular
schedule.
•
Before cleaning, remove the battery from the headset.
•
Use a soft cloth and a little water to wipe the surfaces clean. We
recommend using a 3M™ 5040/7065 Cleaning Wipe or a Scotch-
Brite® High Performance Cloth lightly dampened with plain clean
water.
•
Do NOT soak the headset or immerse it in water; you might damage
the electronics.
•
Do NOT bend the microphone boom.
Note:
The operating temperature range for the G5 Headset should be between
+5 °C and +50 °C
XT-1 Headsets Overview
This chapter provides instructions for using headsets with an 3M™ Wireless
Communication System Model XT-1 after the system has been installed,
configured, and powered on.