to select between the two possible lane modes: CROSS

Operation

Automatic Standby: On and Off

When Automatic Standby is on, the order taker’s microphone and the order point microphone turn off when the vehicle is no longer detected.

Vehicle Detector: Presence or Ignored

When the vehicle detector is on (in presence mode), a car entering the order point is sensed and the ordering system reacts according to the order taking mode. When the vehicle detector is off (ignored), Automatic Listen, Automatic Talk, and Automatic Standby are unavailable. Only Outside or Always On order taking modes are recommended when the vehicle detector cannot be used.

Order Point: Used or Not Used

When the order point is used, customers can order using any of the typical order taking modes, with the exception of the Outside mode (see below for explanation).

Which Order Taking Mode to Select

Each order taking mode is designed for a specific purpose so you do not need to manually select the modes for the individual components and potentially end up with a non-working configuration.

ML/PTT, ML/MLT, AL/PTT, AL/MLT, and Hands free should be selected for typical ordering configurations where all of the drive thru employees are inside of the building and all of the equipment is working properly. The choices between them tend to vary according to the number of people available, how many duties they must perform simultaneously, and possibly employee preferences.

If you plan to have the order taker standing outside with a headset, Outside mode is the best choice. The order point speaker, microphone, and vehicle detector are disabled. This allows hands free communication to staff inside the store for order entry and/or special requests.

If the vehicle detector is not functioning properly, Always On mode is the best choice. The microphone at the order point is on continuously, regardless of the status of the vehicle detector. Typically, when a vehicle detector fails, it reports the presence of a vehicle continuously, which functions as (bookmark).

Change Lane Mode

Perform the following procedure to select the lane mode that is appropriate for your current situation. Descriptions for the two modes follow the procedure.

4. Press until the Lane X selection is highlighted (where X is the lane number, 1 or 2).

5.Press Enter.

6. Press or and SPLIT.

7.Press Enter to implement the change or press Mode to abandon the change and leave the previous lane mode in effect.

Split Lane

Split Lane mode is the preferred mode for heavy volume because it essentially separates the communications between the two base stations.

∙Operators will only hear a signal from the order point last used: single repeating beep from order point 1 or a double repeating beep from order point 2.

November 6 2014 – Revision 2.1

3M™ Drive-Thru Systems Model G5 and Model XT-1

Page 46 of 77

Operating Instructions

Page 45 Page 47
Page 46
Image 46
3M XT-1, G5 operating instructions Which Order Taking Mode to Select, Change Lane Mode, Split Lane
Page 45 Page 47

G5, XT-1 specifications

The 3M G5 XT-1 is a cutting-edge respirator designed for professionals who require advanced protection in various hazardous environments. With its innovative features, this respirator stands out in the market, providing users with an optimal balance of safety, comfort, and performance.

One of the main features of the 3M G5 XT-1 is its advanced filtration technology. Equipped with highly efficient particulate filters, these respirators are designed to capture airborne particles, including dust, smoke, and other harmful contaminants. This effectiveness is further enhanced by the use of activated carbon in certain filter models, which provides an additional layer of protection against gases and odors. The filters are easy to replace, ensuring that users can maintain their equipment without hassle.

Another key characteristic of the G5 XT-1 is its ergonomic design. The respirator is engineered to provide an excellent fit, reducing the likelihood of leakage and ensuring that users receive optimal protection. The adjustable straps and customizable nose bridge allow for a snug fit on various face shapes and sizes, enhancing comfort during prolonged use. This is particularly important for professionals in fields such as construction, healthcare, and manufacturing, who may wear respirators for extended periods.

The G5 XT-1 also features a lightweight construction, which contributes to user comfort. This lightweight design, combined with features such as breathing valves, enhances airflow, reducing breathing resistance. This means that users can perform their tasks more efficiently while experiencing less fatigue.

Another notable technology integrated into the G5 XT-1 is its dual mode of operation. Users can switch between disposable and reusable options, which is particularly advantageous for those who want to balance cost and sustainability. The reusable aspect of the respirator also encourages environmental friendliness by reducing waste.

In conclusion, the 3M G5 XT-1 respirator is a comprehensive solution for those seeking high-performance respiratory protection. With its advanced filtration technologies, user-centric design, and flexible operation modes, the G5 XT-1 meets the diverse needs of professionals working in challenging environments. Its focus on safety, comfort, and adaptability secures its place as a top choice for respiratory protection in various industries.
Top Page Image Contents