926 Manual V2.0(1J9643) 6/10/99 1:39 PM Page 10
RCA Digital Satellite System
The Wireless Phone Jack System allows you to add a phone jack near your TV for easy RCA Digital Satellite System Receiver
After installing the Wireless Phone Jack base unit (see page 6), follow the picture and instructions below to install the extension unit to the RCA Digital Satellite System Receiver.
1.Plug Extension Unit into an electrical outlet.
2.Plug one end of the phone line cord provided into jack on extension unit.
3.Plug the other end of the phone line cord into back of Digital Satellite SystemReceiver phone line jack.
Once your Wireless Phone Jack System base and extension units are installed you can expand your system with additional extensions to add more phone jacks. Extension units are sold separately, ask for Digital Satellite System model D910 (or RCA model RC920).
Back of Digital Satellite System Receiver
Computer Modems
After installing the base unit (see page 6), follow these steps to install the extension unit to a computer modem.
1.Plug Extension Unit into an electrical outlet.
2.Plug telephone line cord from the computer modem into jack side of Wireless Phone Jack Extension Unit.
3.Computer modem is now ready to operate.
Note: The maximum baud rate for the Wireless Phone Jack is 14,400. Best results, however, will be experienced at 9,600.
Under certain circumstances where static is present in your telephone line, the Wireless Phone Jack may not filter or remove such static. This condi- tion can affect computer modem performance. If your computer modem has an adjustable baud and you are experiencing trouble, adjust the baud to a lower speed. In many cases, this will improve performance.
10
