RCA, GE and PROSCAN Brand Devices:
Many of these devices (TVs and VCRs) do not need to be programmed. In the event that programming is required, the code search method is suggested.
Note: With these brands, the device button (TV, VCR)
will usually turn the units on. The OFF/ON button will ; only turn these devices off.
SCIENTIFIC ATLANTIC Cable Boxes:
This brand of cable box can be programmed using the code search method by using the CHANNEL UP key rather than OFF/ON during Code Search. NOTE: The device must be turned on prior to beginning the code search. Once the device turns off, press and release ENTER. In most cases this cable box can be turned on and off using the CHANNEL UP key not the OFF/ON button. If the unit will not turn on using the CHANNEL UP key, then manually turn it on and only partial com- patibility will be achieved.
JERROLD or GENERAL INSTRUMENTS Cable Boxes:
These units can be programmed using the code search method. In some cases, these devices will change than- nels during the code search. Continue until the unit turns off, then press and release ENTER.
ZENITH and OAK Cable Boxes:
Some Zenith and Oak Cable Boxes require pressing CHANNEL DOWN rather than ENTER after numeric entry.
Low Battery Warning:
When your batteries are weak, the device keys will light sequentially indicating it is time to change batteries.
Remote Does Not Respond:
If remote does not respond or “locks up” and your device does not respond to commands, remove the batteries and press the number 1 on the keypad for
60 seconds. Then reinstall the batteries and reprogram the remote for each of your devices.
15
