External connection
Antenna connection
Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be connected to the antenna jack directly, if the antenna cable is a 300ohm flat feeder cable, you need to use the 300ohm/75ohm converter (not included) to con- nect the antenna cable to the antenna jack.
•75Ωcoaxial cable is recommended to eliminate interference and double image due to the unmatched input impedance of the antenna.
•The antenna cable and power line should not be bundled together.
Stand and Wall-mounted (Optional)
1. How to mount the LCD TV ?
(1)Take out the bracket hole cover from groove with screw driver and place on the bracket hole;
(2)Fasten 4 screws into four nuts on the rear cover;
(3)Fasten 2 brackets with 4 M8 screws on the wall as figure 2 shown;
(4)Carefully check for the strength before releasing the LCD TV.
Figure 1 | Figure 2 |
12
