Basic operation (to be continued)
Turning the TV On and Off
1.Insert the power cord plug into a AC outlet, the TV will enter standby mode.Press POWER but-
ton on the remote control to turn it on . The indi- cator will switch from red to green.
2.If you want to stop watching TV or go out for a
while, you can press POWER button on the re- mote control. If you want to watch TV again, you can press this button again.
3.Unplug the power cord when the TV will not be
used for a long period time.
Auto power-off
The TV will enter standby mode in 15 seconds in PC mode,and in other modes it will enter standby mode in 5 minutes when no signal sleep is on.
Memorizing the Channels
Your TV can memorize all of the available channels. After the available channels are memorized, use PROGr/sbutton to browse channels.
Language select
Before using TV, you can set the language:
1)Press MENU button on the remote control, then
press t/u Arrow button to select “Setting” menu as following:
PICTURE | AUDIO | SETTING | FUNCTION CHANNEL | ||
LANGUAGE |
|
| ENGLISH | ||
SCREEN SAVER |
| OFF | |||
OSD POSITION |
| MID | |||
DURATION |
|
| ALWAYS | ||
ADJUST | SELECT |
|
| EXIT | |
| MENU | ||||
14
