RCA RMB-167 manual System Requirements, Software Installation, READS166, Third Party Software

2 SOFTWARE

The RMB-167 board comes with software from Rigel Corporation and third party vendors, whom we work very closely with. Rigel’s own software for the 166 family may be found on the CD-ROM in the Rigel Products file, under 166 Software.

2.1System Requirements

READS166 is designed to work with an IBM PC or compatible, 486 or better, running Windows 95 or Windows NT.

2.2Software Installation, READS166

Place the CD-ROM in your drive. Go to the Rigel Products 166 Software READS166 .exe program. Click on the exe file and the program will begin to load in your system.

Follow the standard install directions answering the questions with the appropriate answers.

2.3Third Party Software

A variety of third party software is available on Rigel’s CD-ROM. The software may be found in the Strategic Partners Folder under Keil, Tasking, and PLS.

Data sheets on the IC’s used on our boards may also be found on Rigel’s CD.

Please note that software updates occur frequently. Please check our web site (and the third party vendors web sites) occasionally to make sure you have the most recent versions of the software.

-3-