RCA RP3755 owner manual Adjusting snooze duration, Setting Countdown Timer, Stopping alarm

THE DIGITAL CD CLOCK RADIO

Adjusting snooze duration

The snooze-alarm control allows extra sleep time after the unit comes on in alarm

mode. Press SNOOZE will turn off the alarm until the snooze period is over. You can use the SNOOZE feature repeatedly for up to about 2 hours, after which the

unit will turn off until the next alarm conditions are met.

THE DIGITAL CD CLOCK RADIO

Setting COUNTDOWN Timer

NAP TIMER COUNTDOWN

1 Select COUNTDOWN timer at the back of the unit .

2 Press TIMER	TIMER
	and the TIMER indicator will appear on the display.
<<	>>

			1
	STEREO CD PLAYER / DIGITAL RADIO
			2
	REV ( SKIP) FWD	REPEAT
	TUNE
		WAKE UP
		CD TRACK
	STOP
OFF	MEMO	VOLUME	RADIO ON
	RECALL SET		BAND

Press and hold SNOOZE		SNOOZE
<<		>>
Press REV REV	or FWD FWD on the top

of the unit to set the “quiet” period (default is 9 minutes) from 1 minute to 30 minutes for which the alarm momentarily goes off.

3	Press REV REV	or FWD FWD to set countdown time.
4	Press TIMER	TIMER to activate countdown. TIMER indicator lights

continuously. The display will show the countdown time as it counts down towards 0:00 (minute:second). Alarm will sound once the timer reaches 0:00.

TIMER

SNOOZE

Stopping alarm

1.To silence the alarm momentarily:

• Press SNOOZE SNOOZE and the alarm will sound again when the snooze period is over (see “Adjusting snooze duration” above)

2.To stop alarm from sounding:

• Press OFF OFF and the alarm will be on again the following day at the same time

3.To cancel alarm completely:

	CANCEL	WAKE 1		WAKE 2
• Press CANCEL		then WAKE 1	or WAKE 2	and the corresponding

alarm(s) won’t sound again the following day. WAKE indicators will not be displayed.

•If you press WAKE 1 or WAKE 2 button again, the previous preset time remains unchanged.

¥ If uninterrupted, the alarms will stop sounding in 2 hours.

5

Setting NAP Duration

You may take a short nap and be woken up by the alarm.

1Click the Timer selector at the back of the unit to NAP NAP TIMER COUNTDOWN

TIMER

2Press TIMER . The TIMER indicator and 0:20 (as default setting) will appear on the display. (i.e. alarm will be turned on in 20 minutes). Display will switch back to real clock time after about 3 seconds.

<<	>>
3 Press REV REV or FWD	FWD to set nap time. Nap time decrease or

increase at 10 -minute intervals between 10 and 120 minutes.

TIMER

4Press TIMER to activate countdown. The display returns to the real

clock time. TIMER indicator lights continuously. Alarm will sound once the timer reaches 0:00.

	Press and hold TIMER	TIMER
5		until the TIMER indicator disappears to cancel
	NAP timer.

TIP: To check the remain NAP timer, press TIMER. The display will show the minutes left. After 3 seconds, the display will return to clock time.

6

RP3755 EN-US rev.2 8-9

6/21/01, 2:41 PM