![](/images/new-backgrounds/1291868/2918689x1.webp)
Display messages
EN | ALL | Select all (Introductory Play back & Erasing All Files) |
| APPEND | Appendix (Adding Appendix) |
| Cut End (Cutting) |
Before you begin
Power supply | Starting up the unit |
This unit can be operated by 2 “AAA” | Press PLAY to turn on the unit to start |
batteries. | playback or recording. |
EN
Cut Start (Cutting) | |
DELETE | Delete (Erasing Selected File) |
FULL | Memory full |
MM/DD | Month / day entry mode. |
12 HOUR | 12 hour time display mode. |
TIME | Time entry mode |
INSERT | Insertion (Inserting New Segments) |
INTRO | Introduction (Introductory Playback) |
OFF | Off (Automatic Voice Recording) |
ON | On (Automatic Voice Recording) |
SEN 07 | Sensitivity Level (AVR) |
TONE | Beeping sound on(Setting Beep Sound) |
NO TONE | No beeping sound (Setting Beep Sound) |
VOL 15 | Volume (Setting Volume) |
YEAR | Year (Setting Year) |
LOCKED | Key locked |
FORMAT | Format the memory |
SPEED | Speed of playback |
WAIT... | Unit is busy |
* ( )- You can find the mentioned displays as you set/ operate them.
4
Installing Batteries (not included)
1.Slide the battery compartment door to the bottom and lift up the door to open.
2.Insert 2 “AAA” batteries with polarities matching indications.
3.Replace the battery compartment door.
Refer to the battery level indicator on display for batteries level. Replace with new batteries when the indicator is empty.
Auto power shut down
The unit will be automatically turned off if left idle for 3 minutes.
Using headphones and external micro- phone
•When headphones are connected, sound output from speaker will be muted.
•When external microphone is connected, no record can be made from
Keys lock
This feature avoids accidental key activation during recording or playback.
1.Press and hold MENU button for 3
seconds, LOCKED will be shown on
display. (LOCK icon will lit) s
2.Press and hold MENU button for 3 seconds again to unlock keys.
Tones
You can activate this feature so that beep sound can be heard whenever you press on any button except during playback and recording.
1. Press MENU button repeatedly until TONE shows on display.
2. Press REVERSE or
FORWARD to set
beep sound ON/ OFF.
3.Press MENU to confirm selection.
5