RS2100 EN 8/8/06 4:26 PM Page 9
Getting Started
Content of Box
•one main unit (with 2 main speakers);
•one Music Navigator remote control;
•one AM loop antennas;
•one mp3 Player;
•one set of earphones;
•one USB cable;
•one Wireless Musiclink transceiver;
•one user manual;
•one PC software and driver installation
•one safety leaflet;
•Owner registration Card.
!Warning:
Use of this product is for your personal use only. Unauthorized recording or
duplication of copyrighted material may infringe upon the rights of third parties and may be contrary to copyright laws.
Note:
Make sure the tracks are encoded in mp3 or Windows Media formats and supported bitrates. Bitrates supported by the player:
mp3 – 32 to 320kbps wma – 48 to 160kbps
Connections of Antennas and Speakers
1.Wireless
2.AM Loop antenna Jacks.
3.FM Pigtail Antenna.
4.AUX IN.
5.Main Speaker Jacks.
| 1 |
2 | 3 |
| |
4 |
|
| 5 |
Using the FM and AM Antennas
Before you use your audio system, you’ll want to make sure both the FM and AM antennas are
positioned properly. Uncoil the FM antenna at EN the back of the unit, making sure it is fully
extended (you may even want to tape it to the wall behind the unit if possible. The higher the better.) You’ll also need to connect the AM antenna loop to the back of the unit if you listen to AM stations. Rotate the AM loop antenna for better reception.
Connecting the Speakers
Each speaker has a black (negative) and a red (positive) jack. When connecting the speakers, match the red wires to the red jacks and the black wires to the black jacks.
Speaker Wire Connection
Push Speaker terminal tab | Release tab to lock wire in |
down to insert wire. | the terminal. |
NOTE: Make sure the insulation is completely removed from the ends of the speaker wires at all connection points.
Installation
To ensure sufficient ventilation, keep the spacings shown below free from other surfaces:
Front View | 4 inches |
4 inches | 4 inches |
Side View |
|
|
|
|
| 4 inches | |
|
| ||
|
|
|
|
|
|
|
|
2
inches
2
