RS2130i EN 15/2/07 4:31 PM Page 16
Display and Settings
Source indication
EN
Play Mode status | CD Tray Status: |
| Lights up when |
| loaded. Flash when |
| playing. |
5.Press TIMER to select source. Press or to select TUNER/TUNER REC/DISC/USB/iPod. If
TUNER REC is selected, press or to select the preset station.
6.Press TIMER to set volume. Adjust VOLUME CONTROL to select desired volume level.
7.Press TIMER to save settings.
Press TUNE/PRESET to cancel setting.
The timer is automatically activated once timer setting is saved.
Activating the Timer
Press TIMER to turn on/off the alarm. The timer
icon is displayed when timer is activated.
Setting the Clock
1.Press and hold CLOCK on the remote control until the hour flashes on the display.
2.Press or to set the hour and then press CLOCK to shift to minute digits.
3.Press or to set the minute.
4.Press CLOCK to save settings. Or press TUNE/PRESET to cancel the setting.
Sleep Mode
You can select the time interval in minutes before the unit turns off automatically.
Press SLEEP to select among OFF, 120, 90, 60, 45, 30, 15 and 5 minutes.
The SLEEP icon lights on the display when sleep mode is activated.
Timer and Program Recording
You can turn on/off the unit or record TUNER at preset times by setting the timer.
You can use Program Recording to preset the unit to record your favorite radio program. When setting the timer, choose TUNER REC as the source to record radio at the preset time. Ensure there is adequate memory in the USB
device connected.
View and Adjust Remaining Sleep Time
When sleep is activated, press SLEEP once to view remaining sleep time. Press again to change the time.
Note: Sleep is automatically
Setting the Timer
Showing Demonstration
Press DEMO to turn on/off demonstration mode.
1.Press and hold TIMER on the remote control until Timer On and the clock hour flashes on the display.
2.Set the Timer ON setting. Press or to set the hour and then press TIMER to shift to minute digits.
3.Press or to set the minute.
4.Press TIMER to change to Timer Off setting with clock time flashing. Repeat steps 2 & 3 for timer off time setting.
7