RS2654_EN(Canada) 2/7/06 3:28 PM Page 12
Settings
Settings
EN Showing Demonstration
Press DIMMER / DEMO to turn on/off demonstration in standby mode. The demonstration scrolls through all display operations.
Setting the Clock
1.Press and hold CLOCK until the hour flashes on the display.
2.Press DIGITAL TUNING 
or 
to set the hour and then press CLOCK to shift to minute digits.
3. Press DIGITAL TUNING |
| or |
| to set the |
|
| |||
|
|
minute.
4. Press PROG•SET to save settings or STOP |
4.Press TIMER to change to OF (timer off time) with clock time flashing. Repeat steps 2 & 3 for timer off time setting.
5.Press TIMER to select source. Press DIGITAL
TUNING 
or 
to select between CD /
TUNER .
6.Press TIMER to set volume. Adjust VOLUME CONTROL to select desired volume level.
7.Press PROG•SET to save settings.
Press STOP |
| to quit setting. |
|
The timer is automatically activated once timer setting is saved.
Activating the Timer
Press and release TIMER to turn on/off the alarm.
Sleep Mode
You can select the time interval in minutes before the unit turns off automatically.
Press SLEEP to select among OFF, 120, 90, 60, 45, 30, 15 and 5 minutes.
The 
icon lights on the display when sleep mode is activated.
View Remaining Sleep Time
When sleep is activated, press SLEEP once to view remaining sleep time.
Adjust Sleep Time | EN |
|
Press SLEEP again when the remaining sleep time is displayed to change sleep time.
Note:
Sleep is automatically
to quit setting. |
The timer icon 
is displayed when timer is activated.
Sound Features
Note:
When system is ON, you can press CLOCK to display the current time for about 2 seconds.
Adjusting the Display Brightness
1.Press and hold DIMMER/DEMO for more than 2 seconds.
2.While the current dimmer level is displayed, press and release DIMMER/DEMO repeatedly to select the desired level (DIMM 1 - 3).
Volume Control
Press VOLUME CONTROL 
or 
on the main
unit or press VOL 
or 
on the remote control to adjust volume level. The bars on the volume display increases and decreases to show
Using Preset Equalizer Curves
Press EQ to toggle among FLAT, ROCK, POP, JAZZ, CLASS and CUSTOM. The display shows your selection briefly.
Setting the Timer
1.Press and hold TIMER until the ON and clock hour flashes on the display ( ON - timer on time ).
2.For setting time, press DIGITAL TUNING 
or 
to set the hour and then press TIMER to shift to minute digits.
3.Press DIGITAL TUNING 
or 
to set the minute.
the change in volume level.
Bass Boost
Press BASS BOOST to turn on/off boosting the bass frequency. The BASS icon lights on the display when it is activated.
Muting Audio
Press 
MUTE on the remote to cut the sound. (Remote Only)
Creating a Custom Curve
1.Press EQ to select CUSTOM mode.
2.While CUSTOM is displayed, press DIGITAL
TUNING 
or 
to cycle among displayed bass- and treble - range levels.
3.While BAS or TRE is displayed, adjust VOLUME CONTROL to set the associated gain between
6
7
