Player Menus
Play |
|
|
|
|
|
Play Mode |
|
|
|
|
|
Parental Control |
| TV Image |
|
| 4x3 |
|
|
| standard | ||
Display |
| Black level |
| Dim | |
Sound |
| Video |
| ||
Languages |
| Progressive Scan |
| Off | |
|
|
|
|
|
|
TV Image
Display settings
1.Select the Display option in the main menu using the up/down arrow buttons and press OK.
2.Select an option using the left/right arrow buttons and press OK.
Depending on the format of the DVD disc, you can choose the picture format (aspect ratio) best suited to the format of your TV screen:
4x3 Letterbox: gives best reproduction of pictures recorded in this format (i.e. with horizontal bands at the top and bottom of the screen) or in 16x9.
4x3 Standard: reproduces a 4x3 picture without distortion.
16x9 Widescreen: reproduces 16x9 format films in full on a 16x9 screen.
Black level
This option lets you adjust the video brightness level.
Three settings are available: Normal, Dark and Light.
Video
If you are using component video (Pr, Pb, Y) or
Progressive Scan
Progressive Scan provides high quality pictures with less flickering. Turn on Progressive Scan if you used the Component Video jacks of the player to connect a TV or monitor compatible with a progressive scan signal.
Press OK to activate Progressive Scan.
IMPORTANT! Once Progressive Scan has been activated, an image will only be visible on a progressive scan TV or monitor. If you choose this option and you do not have a progressive scan TV or monitor, you may get a picture with incorrect color or no color. If you activate Progressive Scan by mistake, follow the procedure below to reset the unit:
Press and hold the SUBWOOFER button on the front panel. The video output will be restored to the standard setting and a picture will once again be visible on a conventional analog TV or monitor.
20
RTD205 | 20 | 2/28/05, 10:35 AM |
