RTD260 EN (07_06_06) 15/6/06 4:34 PM Page 7
Connections and Setup
Front panel controls
EN
ON/STANDBY - Switch the unit on and off.
SUBWOOFER - Toggle between different subwoofer output levels (soft/balance/strong/powerful). VOLUME - Adjust the volume.
SKIP DISC – Go to the next slot in the disc tray.
DISC OPEN/CLOSE 1/2/3/4/5- Open and closes the disc tray according to the disc tray number. SOURCE - Select the input source.
STOP - Stop disc playback.
PLAY/PAUSE/OK - Start playing and pauses a disc. In SIRIUS mode, confirms selection.
SKIP/CATEGORIES BWD/FWD/ - In DVD/USB mode, skip to the previous and the next track or file. In Sirius mode, select previous or next categories.
HEADPHONE JACK - Insert headphone here
MUSIC/PHOTOLINK - Connect USB devices for playing music and photos. IR - Connect
/ - In DVD/USB mode, navigate buttons which move through
PRESET/CHANNEL - Toggle between the Preset mode and Channel mode.
SIRIUS /DISPLAY - Enter SIRIUS mode from other sources. Toggle display between Channel Playback Mode, Channel List Mode, Category Tuning Mode, channel name, song title and artist name.
FM 75Ω
White |
AM LOOP |
GND |
Connecting the Antennas
The AM and FM antennas connect to the AM and FM terminals on the system’s back panel.They must be hooked up in order to receive clear reception.
AM Loop Antenna and FM Indoor Antenna
1.Uncoil the AM Antenna wire.
2.Press down on the Antenna tab to open the terminal
Note: Make sure the white wire on the AM lop antenna is inserted into the left terminal.
Illustrations contained in this document are for representation only. | 3 |