Philips MX3600 warranty Hookups TV, Connecting to a TV with a Composite yellow Video In Jack

ANTENNA IN

75

10 Hookups - TV

Connecting to a TV with a

Composite (yellow) Video In Jack

Yellow Video Cable

1

Red & White

Audio Cable

Back of TV

(example only)

3 2

Pr/Cr Pb/Cb Y

Rear of DVD Receiver 3

Connect the DVD Receiver’s yellow VIDEO OUT jack to

1 the VIDEO IN jack on your TV. Use the supplied composite (yellow) RCA-style video cable.

To hear TV channels through the DVD Home Cinema System,

2 connect the supplied red and white audio cables to the DVD Receiver’s red/white, right/left (TV) AUDIO IN jacks and to the TV’S right/left AUDIO OUT jacks. Match the cable colors to the jack colors.

Connect the power cords of the DVD Receiver and TV to a

3 power outlet.

Turn on the TV and set it to the correct Video In channel.

4 Go to the lowest TV channel and change channels down until you find the Video In channel. (It is not channel 3 or 4 as it might be when using a VCR.) See your TV owner’s manual for details.

Press STANDBY-ONy on the front of the DVD Receiver to

5 turn on the DVD Receiver. The red Standby light will disappear.

Helpful Hints

• If your TV only has a single Antenna In(put) jack, you will need an accessory RF Modulator to view the DVD Playback on your TV. The RF Modulator converts the Video signal output from the Receiver so that it can be played through the TV’s Antenna connector.

•See your electronics retailer or contact Philips for details on RF Modulator availability.