Connect the supplied Center speaker to the Green/Black +/- CENTER SPEAKER jacks on the rear of the DVD Receiver.

Hookups - Speakers 13

Connecting the Speakers

Use the supplied speaker wires.

Match the color coded wiring. Connect

1

 

 

the +,- terminals on the Receiver (FR, FL,

 

 

etc.) to the correct +,- Speaker terminals.

Front Speaker (Right)

Center Speaker

a

.047"(12mm)Connecting SpeakerPUSHINCables

 

+-

+-

b

DOWN

c

 

 

 

 

 

PUSH

 

 

 

 

3

2

Front Speaker (Left)

+-

Subwoofer

6

Subwoofer Power Cord

Power Outlet

4

Pr/Cr Pb/Cb

Y

 

Rear of DVD Receiver

Rear Speaker

Rear Speaker

(Surround Right)

(Surround Left)

+

-

+

-

5

Connect the supplied Front Right speaker to the Red/Black

1 +/- FR (Front Right) SPEAKER jacks on the rear of the DVD Receiver.

Connect the supplied Front Left speaker to the White/Black

2 +/- FL (Front Left) SPEAKER jacks on the rear of the DVD Receiver.

3

Connect the supplied Surround Right speaker to the

4 Gray/Black +/- SR (Surround Right) SPEAKER jacks on the rear of the DVD Receiver.

Connect the supplied Surround Left speaker to the

5 Blue/Black +/- SL (Surround Left) SPEAKER jacks on the rear of the DVD Receiver.

Connect the supplied Subwoofer cable (with RCA plugs on

6 either end) to the WOOFER LINE OUT jack on the DVD Receiver. Then connect the other end of the cable to the AUDIO IN jack on the Subwoofer.

Connect the Subwoofer’s power cord to a power outlet when connections are complete. Set the Subwoofer’s Volume/On control

to On.

Select the phase polarity (0° or180°) at the rear of the subwoofer to determine the best bass reproduction effect for certain listening room conditions.

Press SUBW +/- buttons on the remote to adjust the volume level of the Subwoofer (-15dB to 10dB). SUB +XX DB” is shown in the DVD Receiver’s Display panel.

Rear of MX3600

Woofer Line Out

Volume/On Control

Page 13
Image 13
Philips MX3600 warranty Hookups Speakers, Connecting the Speakers