Philips MX3600 warranty Digital Output, Night Mode, Press 9 repeatedly to select z, then press

While playback is stopped, press SYSTEM MENU. Press ;

or - to select the icon.

30 Digital Output, Night Mode

Digital Output

Set Digital Output according to your audio connection.

1

2 Press 9 repeatedly to select z, then press :.

1,5

3 DIGITAL OUTPUT will be selected. Press :.1-4

Press 9 or 8 to select ALL, PCM 96K, or PCM 48K, then

4 press OK.

●Choose ALL if you used the DIGITAL OUT - COAXIAL or

OPTICAL jack on the DVD Receiver to connect to optional audio equipment.

● Choose PCM 96K if you connected the DVD Receiver to optional audio equipment that is capable of processing sampling rates of 96 kHz.

●Choose PCM 48K if you connected the DVD Receiver to optional

audio equipment that cannot process sampling rates over 48K. Check the owner’s manual of the optional audio equipment.

DIGITAL OUTPUT

NIGHT MODE

CENTER DELAY

REAR DELAY

TEST TONE

SPDIF/RAW OUTPUT

ALL

PCM 96K PCM 48K OFF

5 Press SYSTEM MENU to remove the menu.

Night Mode

Set Night Mode to On to level the volume during Disc playback. This reduces the highs and lows of the volume.

While playback is stopped, press SYSTEM MENU. Press ;
1 or - to select the		icon.	1,5
2 Press 9 repeatedly to select z, then press :.
3 Press 9 to select NIGHT MODE, then press :.
Press 9 or 8 to select ON or OFF, then press OK. OFF is
4 the default setting.
	DIGITAL OUTPUT
	NIGHT MODE	OFF
	CENTER DELAY	ON
	REAR DELAY
	TEST TONE
	NIGHT MODE SET TO OFF

5 Press SYSTEM MENU to remove the menu.

1-4

Helpful Hint

•You can activate Night Mode quickly by pressing NIGHT on the remote control.