| Test Tone |
| This function is used to test the speaker |
| setting and change the speaker level. A short |
EN | noise comes successively from |
each speaker. |
Notes:
•Night mode function is available only on DVD discs recorded in Dolby Digital.
•The receiver speaker distance default settings are as follows:
Front (FR/FL Dist.) | 15 ft |
Center (Cen Dist.) | 15 ft |
Surroudn (SR/SL Dist.) | 10 ft |
|
|
Video Setup
1.Select the Video icon in the main menu using the left/right arrow buttons.
2.Select a menu option using the up/down arrow buttons and press OK.
Video Setup |
Video |
TV Type |
HDMI Setup |
Brightness |
TV Type
Depending on the format of the DVD disc, you can choose the picture format (aspect ratio) best suited to the format of your
TV screen:
•4:3 PS: reproduces a 4:3 picture without distortion.
•4:3 LB: gives best reproduction of pictures recorded in this format (i.e. with horizontal bands at the top and bottom of the screen) or in 16:9.
•16:9 (widescreen): reproduces 16:9 format films in full on a 16x9 screen.
Video
Progressive Function provides high quality pictures with less flickering. Turn on Progressive Scan if you used the Component Video jacks of the unit to connect a TV or monitor compatible with a progressive
scan signal.
Select
HDMI Setup
This lets you select the resolution of the player's output according to the connected TV.
Video Setup |
|
Video |
|
TV Type |
|
HDMI Setup | 480p |
Brightness | 720p |
| 1080i |
| 1080p |
| Off |
• Supported HD JPEG mode: 480p, 720p, | |
1080i and 1080p. |
|
Brightness
This option lets you adjust the video brightness level on a scale of 0 to 12, with 12 being the brightest.
IMPORTANT!
Once Progressive Scan has been activated, an image will only be visible on a progressive scan TV or monitor. If you choose this option and you do not have a progressive scan TV or monitor, you may get a picture with incorrect color or
no color.
Press and hold SUBWOOFER on the front panel. The video output will be restored to the standard setting and a picture will once again be visible on a conventional analog TV or monitor.
22