RCA RTD317 user manual CD Ripping, Ripping CD to USB device, Start Ripping CD

CD Ripping

An overview

CD ripping allows you to rip tracks on CD to EN USB device. This unit supports Mass Storage Class (MSC) devices. Connect the USB device

first before ripping.

To stop ripping during the process, highlight "Cancel" button and press OK.

When ripping has finished, press REC to quit the ripping menu.

Ripping CD to USB device

File Names of Ripped Files

1. During CD playback, press REC on the

You can find the ripped files saved in a

remote to activate the Ripping Menu.

folder named “CDRECORD” with file name

2. Select one of the menu items using the

as “CDTKxx01”, “CDTKxx02”...etc.

up/down arrow buttons. Press the left/

right arrow buttons or OK to change the

setting.

Speed

High speed ripping mode can save time

when ripping from CDs. Select 1x(normal

speed) or 2x(double speed) by pressing the

left/right arrow buttons. Press the down

arrow button to move to the next

menu item.

Source

You can select to rip one track(TRACK), the whole

disc(ALL TRACKS) or programed tracks

(PROGRAM). Press the down arrow button to

Notes:

move to the next menu item.

•

The USB device for CD ripping must be

Destination

connected to the unit in Mass Storage Class (MSC)

mode. Your device should be shown as a drive

The destination of the ripped files is

letter, instead of the name of the USB device,

defaulted as USB. No selection is needed.

when connected to the computer in

MSC mode.

Start Ripping CD

• CD Ripping

function

only

supports

CDDA

discs.

Highlight START and press OK to

•

During

1x

ripping,

the

audio

output

is

for

monitoring

purpose

only.

It does

not represent

start ripping.

the true audio quality recorded.

• During 2x ripping, the audio output is muted.

•

CD Ripping function does not support

Track progress

ripping

files

to Multi

Card

Reader via USB

port.

Total progress

•

“NO USB DEVICE” will be displayed if no USB

device is connected to the unit.

“NO PROGRAM TRACK” will be displayed if

no program list is created.

“USB DEVICE

IS FULL”

will

be

displayed

if

Change Speed

Cancel

the USB device is full.

The screen above appears when ripping

“USB WRITE PROTECT” will be displayed if

the USB device is write-protected. You

start. The first progress bar represents the

should switch off the write protection first.

progress percentage of the current ripping

• You can

select

ripping speed even

after

track while the second progress bar

ripping is started. Highlight the SPEED

represents the total percentage. The

option

and

press the

left/right

arrow

buttons.

percentage of both bars will be identical if

•

“DEVICE REMAIN” indicates the total

there is only one track to rip.

remaining time of the USB device.

18