![Advance Sound Control](/images/new-backgrounds/28770/2877043x1.webp)
Advance Sound Control
•Speaker distance: For optimum surround experience measure the distance between the speaker and your favorite listening position.
1. Press and hold SOURCE for 3 seconds
SOURCE SURROUND
WER
PRESET - | PRESET + |
2.While the Display is showing FRNT 15 FT, press PRESET + or PRESET - on the main unit or LEFT or RIGHT arrow on the remote control to adjust the delay setting.
|
| m |
|
| / | C H | - | I | |
SOURCE | SURROUND |
|
|
| D | ||||
|
|
|
|
| G | CK | • | ||
|
|
| MUTE |
|
| O |
| ||
|
|
|
|
|
| BA |
| ||
|
|
| RD | M | SHIFT | INFO |
| ||
|
|
|
|
|
| ||||
|
| E | • |
|
|
|
|
|
|
|
| D |
|
|
|
|
|
| |
|
| I |
|
|
|
|
|
| |
|
| U |
|
|
|
|
|
| |
|
|
| G |
| OK |
|
|
|
|
|
|
|
|
|
|
|
|
| |
PRESET - | PRESET + |
|
|
| FUNCTION |
|
|
| |
|
|
|
|
|
|
|
| ||
|
|
| MENU |
|
| CLEAR |
| ||
|
|
|
| 1 | 2 |
|
| 3 |
|
3. Press SOURCE once to move to the next delay setting.
Speaker Icons
The receiver shows you the speakers’ settings on the display with the following icons:
Front Speakers
CCenter Speaker
| Rear Speakers |
LFE | Subwoofer Present |
Displaying Program Formats
When a digital source is playing, the receiver will automati- cally switch to the proper surround mode and indicates on the speaker icons on the
C
SOURCE SURROUND
WER
PRESET - | PRESET + |
4.Repeat step 2 to set up the next speaker
5.When set up is done, wait for 5 seconds to automatically save your settings or press any source key to save your
selection and set up mode.
It is important to note, however, that not all Dolby Digital sources are encoded with the full complement of five chan- nels plus LFE*. Speaker icons show how many and which speaker you have enabled (See “Fine Setting of the Speakers”) and the letters inside the speaker icons show which channel is present in the source information. For example, the diagram shown means you have all the five speakers and subwoofer enabled and the digital sources you played have five channels plus LFE complemented. (Dolby Digital 5.1 Channels)
*LFE stands for Low Frequency Effect. The indication “LFE” appears if the digital source contains LFE information. In this case, the bass signal will be delivered to the subwoofer, offering more dynamic deep bass sound effects. If the letter
is flashing, the signal is either too weak or just gone.
18