RCA STAV3860 owner manual Setting UP Speaker Levels for DSP

SETTING UP SPEAKER LEVELS FOR DSP

SOURCE		CD	TUNER
POWER
	TAPE	SOURCE SELECT
$ ASMS $		! SEARCH !
1	2	3	4
@	*DECK 2 &		#

1Use the DSP MODE button to turn on a DSP effect.

You can cycle through the five different types with the DSP button.

2Play a source (CD, tape,etc.) and set the master volume to a moderate level.

3Press the CH SELECT button.

The first speaker FL (front left) and it's relative volume level (+/- **dB) appears in the display.

3, 5, 7

5 6 7 8

EFFECT		DISC/STATION
9	0	@	#
D. ACCESS			CLASS
		TUNING
		DECK 1
T.TONE		&
FM/AM			MPX
		TUNING
SORROUND	2	DSP MODE	MUTING
CH SELECT	CHANNEL
		LEVEL
RECEIVER		FL	VOLUME
	FUNCTION DIMMER

POWER

STAV-3860

AUDIO/VIDEO SYSTEM REMOTE OSR

4Adjust the front left (FL) speaker level with the

CHANNEL LEVEL +/– buttons.

Adjust the volumes of the speakers to a standard level of your

1choice when seated in your normal listening position.

5Press CH SELECT again to move to the next speaker.

4, 6,		The second speaker CT (center) and it's relative volume level
7		(+/-**dB) appears in the display.
	6	Adjust the center (CT) speaker level with the
		CHANNEL LEVEL +/– buttons.
2		Adjust the volume of the speaker so its volume seems the same
		as the previous speaker from your normal listening position.

7 Repeat steps 3 & 4 for all of your speakers.

Adjust the volumes of all the speakers so their volume seems the same from your normal listening position.

• These speaker level settings are applicable to DSP

memo

effects only.

•Each effect level applies only to the DSP type (HALL for example) that it is set in. You can set the effect levels for each type independently.

16