Symptom | Cause | Remedy |
Cannot be remote controlled. | • | The remote control unit's |
|
| batteries have worn out. |
| • Too far away or bad angle of | |
|
| operation. |
| • | There is an obstacle between the |
|
| receiver and the remote control. |
| • | Strong light such as fluorescent |
|
| light is shining onto the unit's |
|
| remote control signal light |
|
| receiving window. |
•Replace the batteries (see "Preparing the Remote Control" on page 7).
•Operate within 7 m, 30° of the remote sensor on the front panel (see "Preparing the Remote Control" on page 7).
•Remove the obstacle or operate from another position.
•Avoid exposing the remote sensor on the front panel to direct light.
If the unit does not operate normally due to external effects such as static electricity, disconnect the power plug from the outlet and insert again to return to normal operating conditions.
30
