16
ZERO SEARCH
Current tape counter is
2:17:25
Press REW to go to
0:00:00
Press SEARCH to exit
ZERO SEARCH
Current tape counter is
-2:17:25
Press FF to go to
0:00:00
Press SEARCH to exit
Commercial Scan (SEARCH Button)
This is useful for scanning commercials or short program segments.
1. Press SEARCH once during playback to advance the tape
approximately 60 seconds.
2. Press SEARCH twice during playback to advance the tape
approximately 120 seconds.
SRCH+appears in the VCR’s display panel.
Using the Playback Features
Playing a Tape

Index Search

The VCR has a “VHS Index Search System” that automatically records an index mark on the
tape every time you begin recording a program. During playback you can locate the program
you want to play by the number of index marks.
The VCR will automatically locate the index number you select. The VCR will search forward
or reverse from the location you are on the tape.
1. Insert the prerecorded tape and press STOP.
2. Press SEARCH on the remote to display the INDEX SEARCH
menu on the TV screen.
3. Press FFor REW to search for the next index mark or press two
number buttons to enter the specific index mark you want the
VCR to search for.
Press CLEAR to correct an entry.
4. Press FF to search forward or press REWto search in reverse.
5. Press STOP to stop index searching.
Some index marks may be missed by the VCR.
• A mark too close to your location on the tape.
• The mark at the beginning of a recorded segment of five
minutes or less.
• The first index mark on the tape when you start at the
beginning of the tape.
Zero Search
The zero search feature allows you to quickly return to a counter reading of 0:00:00at any spot
on the tape. This is convenient when you want to watch a segment of the tape several times.
1. Insert the prerecorded tape and press STOP.
2. Press DISPLAYtwice to display only the time counter on the TV
screen.
3. Locate the point on the tape that you want to return to quickly.
4. Press CLEARto reset the time counter to 0:00:00.
5. You can continue to play the tape or perform other functions.
When you are finished, pressSTOP.
6. Press SEARCHtwice to display the ZERO SEARCH menu. The
current tape counter is displayed.
7. Press REW to return to 0:00:00. When the VCR reaches 0:00:00
it will begin playback.
If the time counter reading has a minus (– ) in front of it, press
FF on the remote orFWD on the VCR to return to a reading of
0:00:00.
8. Press STOP to stop zero search.
INDEX SEARCH
Press REW or FF
to begin scanning
OR
Enter a specific
Index number
--
Press SEARCH to exit
INDEX SEARCH
Searching for
Index number
03
Press STOP to cancel
–OR–