RCA VR636HF manual VCR Plus+ Recording, Press Menu to enter the VCR PlusCode number

RECORDING

3.Enter the VCR PlusCode shown in your local television programming guide.

VCR PLUS+

Enter PlusCode Number (from TV listing)

128768

Press CLEAR to correct

Press MENU when done

4. Press MENU to enter the VCR PlusCode number.

How often should this program record?

1 One time

2 Daily (every day)

3 Weekdays (M-F)

4 Weekly (once per week)

0Cancel

5.Indicate how often you want the program to be recorded.

Program 1 (One time)

Channel	03 Cable
Start Time	08:00 PM
End Time	09:30 PM
Start Date	11/18/98 Wed
Tape Speed	SLP

Press CLEAR to adjust

Press MENU to save

6.Change the speed with the SPEED button on the remote or the program end time with the CLEAR button on the remote (if necessary).

Changing the end time comes in handy when you are recording a program, such as a sporting event, that may exceed the scheduled broadcast time.

7.Press MENU to save the program.

Program 1 has been saved

Remember to insert a recordable tape and turn the VCR off before the program start time.

Press MENU to continue

VCR Plus+ Recording

Clock must be set correctly.

Insert a tape with the safety tab in place and enough tape to record the program.

The TIMER indicator appears in the display when you turn off the VCR and a timer recording has been set. It flashes if there is no tape in the VCR.

PROGRAMS OVERLAP appears if you have entered two programs where the times overlap.

UNRECOGNIZED NUMBER... PLEASE RE-ENTER appears when the VCR does not recognize the PlusCode number.

If your cable box can be controlled by the VCR, turn it on and leave it on before the recording is to begin.

If your cable box cannot be controlled by the VCR, turn it on and tune it to the channel you want to record before the recording is

to begin.

Timer recordings will not be lost in the event of an extended power outage.

33