RCA VS2000 user manual Channel Scan

20

4. A. 3 USALS

-Please go to Antenna Setup and select USALS from motor.

-Press F1 then Pop-up will be appeared. -Press arrow button to write Longitude

-Press arrow button to write Latitude, then OK to work.

4. B. CHANNEL SCAN

It will be more convenient to use“Channel Scan”procedure when you want to search channel for a specified transponder offered from the satellite. As in“Antenna Setup”,

“Channel Scan”also searches all channels broadcasted over a specific transponder using its predefined information. You can add a new transponder if you cannot find it on the predefined transponder list.

Select“ Channel Scan”menu in“Installation”menu, and the following screen will be displayed.

4. B. 1 Channel Scan

Select the desired satellite using the“left/right”keys (◀∙▶).

Select the“Antenna Configuration”icon using the browse keys(▲∙▼ ,◀∙▶). Press“OK”key, and set“LNB Power”,“LNB Type”,“LNB Freq”,“22KHz”,“Search Option”, and “DiSEqC 1.0”fields to the appropriate value using the“left/right”keys(◀∙▶) at each field. Check the signal strength and press“Exit”key.

Select the“Search/Edit TP”icon using the“left/right” keys(◀∙▶). Press“OK”key, and select the desiredtransponder using the“up/down”keys (▲∙ ▼). Press“OK”key to start the manual searching for selected transponder.

MENU OPERATION

You can see the progressive status of channel searching.

If you cannot find the desired transponder from the transponder list, you can add it by inputting appropriate parameter values for a new transponder using the“F1”key. When you want to change the parameter of an existent transponder, select the parameter using the“F1”key, change its value and press the“Exit”Key.Correctly set various parameters.

Freq. : Input the frequency of the transponder you want to find manually.

S/R : Inputs the symbol rate of the transponder you want to find.

PoI. : Select the polarization of the transponder you want to find. In the case of horizontal,18V and in the case vertical, 13V are output through LNB line.

FEC : Select the FEC of the transponder you want to find. You can select the value of 1/2, 2/3, 3/4, 5/6, 7/8 or auto.

4.B. 2 ADD SATELLITE

You can add a new satellite. Select the“Add Satellite”icon using the“left/right”keys (◀∙▶),

and press the“OK”key.

Select the“Search/Edit TP”icon using the“left/right”key (◀∙▶). Press the“OK”key and add a new transponder using the“F1”key. You should set various parameters of the transponder. The default name of the added satellites is“UserSAT-No.”

4. B. 3 RENAME SATELLITE

You can also change the satellite name. Select the“Rename Satellite”icon using the“left/right” keys (◀∙▶).

Press“OK”key and select the character which you want to edit using the browse

keys (▲∙▼,◀∙▶). Press the“OK”key to confirm. Save the character currently renamed using the“F2”key.

4. B. 4 DELETE SATELLITE

You can also delete the user satellite. Select the satellite that you want to delete from the satellite list. Select the“Delete Satellite”icon using the browse keys (▲∙▼,◀∙▶).

Press the“OK”key, and the selected satellite will disappear.

MENU OPERATION 21