RCF PX1000, RX1000, RX1001, TX1000 switch it off immediately and disconnect the power supply cable

ENGLISH

3.Make sure that no objects or liquids can get into this product,as this may cause a short circuit.

4.Never attempt to carry out any operations, modiﬁcations or repairs that are not expressly described in this manual.

Contact your authorized service centre or qualiﬁed personnel should any of the following occur:

•the product does not function (or functions in an anomalous way);

•the power supply cable has been damaged;

•objects or liquids have got into the unit;

•the product has been subject to a heavy impact.

5.If this product is not used for a long period, switch it off and disconnect the power cable.

6.If this product begins emitting any strange odours or smoke, switch it off immediately and disconnect the power supply cable.

7.Do not connect this product to any equipment or accessories not foreseen. For suspended installation, only use the dedicated anchoring points and do not try to hang this product by using elements that are unsuitable or not speciﬁc for this purpose.

Also check the suitability of the support surface to which the product is anchored (wall, ceiling, structure, etc.), and the components used for attachment (screw anchors, screws, brackets not supplied by RCF etc.), which must guarantee the security of the system / installation over time, also considering, for example, the mechanical vibrations normally generated by transducers.

To prevent the risk of falling equipment, do not stack multiple units of this product unless this possibility is speciﬁed in the instruction manual.

8.RCF S.p.A. strongly recommends this product is only installed by professional qualiﬁed installers (or specialised ﬁrms) who can ensure correct installation and certify it according to the regulations in force.

The entire audio system must comply with the current standards and regulations regarding electrical systems.

9.Supports and trolleys

The equipment should be only used on trolleys or supports, where necessary, that are recommended by the manufacturer. The equipment / support / trolley assembly must be moved with extreme caution. Sudden stops, excessive pushing force and uneven ﬂoors may cause the assembly to overturn.

10.There are numerous mechanical and electrical factors to be considered when installing a professional audio system (in addition to those which are strictly acoustic, such as sound pressure, angles of coverage, frequency response, etc.).