BCZ2450S/T
12. Optional blade usage (for BCZ2450S only)
areas of dense growth.
d. Keep the blade sharp. A dull blade increase the chance of blade thrust. e. Avoid feeding the blade too rapidly.
The blade can bounce away from material being cut if the blade is fed
■ MAINTENANCE
BLADE
• Check the blade and the fasteners for looseness, cracking, or bending.
• Check the cutting edges and reform with a flat file.
U
faster than its cutting capability.
f. Cut only from your right to your left. g. Keep your path of advance clear of material that has been cut and other
debris.
3.How you can maintain the best control:
a.Keep a good, firm grip on the unit with both hands. A firm grip can help neutralize bounce. Keep your right and left hands completely around the respective handles.
b.Keep both feet spread apart in a comfortable stance and yet braced for the possibility that the unit could bounce. Do not overreach. Keep firm footing and balance.
OPT11
S
(A)22, 24-tooth blade
(B)8-tooth blade
(C)
Point (OPT11) :
1.Keep the end corner sharp.
2.Round the root of the edge, using round file.
3.Do not use water when using a grinder.
IMPORTANT
•It is recommended that filing should be done by professionals.
•Especially regarding filing the
■TRANSPORTING THE UNIT
•When you finish cutting in one location and wish to continue work in another spot, turn off the engine, and lift up the unit and carry it paying attention for the blade.
•Never forget to place the protective cover over the blades.
•When transporting the unit over long distances, detach the blade fix the unit by ropes.
