RedMax EXZ2401S-BC manual  23 , Operation, OP10, Adjusting Throttle Cable, idle adjusting screw

8. Operation

OP9

.04 in

(1~2mm) (1)

OP10

(1)

IMPORTANT

•Except for an emergency, avoid stopping the engine while pulling the throttle lever.

■ADJUSTING THROTTLE CABLE

•The normal play is 1 or 2mm when measured at the carburetor side end. Readjust with the cable adjuster as required. (OP9)

(1) cable adjuster

■ADJUSTING IDLING SPEED (OP10)

1.When the engine tends stop frequently at idling mode, turn the adjusting screw clockwise.

2.When the cutting head keeps rotating after releasing the trigger, turn the adjusting screw counter-clockwise.

(1) idle adjusting screw

NOTE

•Warm up the engine before adjusting the idling speed.

23 