EXZ2460S-PH

6. Set up

SE1

■MOUNTING ENGINE (SE1)

1.Push the driveshaft housing toward the clutch housing and rotate it by hand to check that the driveshaft is engaged with the gears.

2.Insert the driveshaft housing into the clutch housing until it bottoms, and align the positioning holes on the clutch housing and the shaft tube and install the screw. When difficult to engage, twist the engine slightly.

3.Fasten the clamp securely with two screws.

SE5

(1)

10inches (25cm) ahead of the throttle lever), and secure it by tightening the knob at the handle base.

■JOINT ATTACHMENT (SE5)

•Insert the attachment to the main shaft.

•Tighten the knob bolt securely.

(1) Knob bolt

IMPORTANT

Tighten the screws gradually by turns.

BC-EX3 SE1

(BC-EX3 only)

■INSTALLING DEBRIS GUARD

•Attach the debris guard with the bolts provided to the shaft. (SE1)

SE2

■CONNECTING THROTTLE WIRE

1. Remove the air cleaner cover.

2. Connect the end of the throttle wire to the joint on the top of the carburetor. (SE2)

■CONNECTING SWITCH WIRES

•Connect the switch wires between the engine and the main unit. Pair the wires of the same color.

BC-EX3 SE2

■ INSTALLING LINE HEAD (SE2)

1.

While locking the gear shaft, by

 

inserting the supplied tool into the

 

upper holder on the gear box, loosen

 

and remove the hexagon nut(left-

 

handed)

2.

Fit the line head assembly to the gear

 

shaft over the holders. Hand-tighten it

SE3

(1)

■INSTALLING HANDLE

(BC-EX3, LRT-EX3 only) (SE3)

•Install the handle to the shaft tube and clamp it at a location that is comfortable to you.

(1) About 19 inches (48 cm)

BC-EX3 SE3

securely.

■ BALANCE UNIT

1.Put on strap and attach unit to strap.

2.Slide clamp up or down until unit balances with head just touching on the ground. (SE3)

SE4

(RMS-EX only) (SE4)

1. Remove both screws from the handle.

2. While spreading the handle at the mounting hole, position the handle on the outer tube as shown.

3. Reinstall the two mounting screws in the handle, but do not tighten them at this time.

NOTE

One side of the handle is recessed to receive the hex nuts.

4.Locate the handle at the best position for operator comfort (usually about

LRT-EX3 SE1

(LRT-EX3 only)

■ATTACHING THE TRIMMING MECHANISM (SE1)

1.Remove the screw screwed into the end of the trimming mechanism.

2.Insert the end of the trimming mechanism into the shaft tube.

3.Line up the hole on the end of the trimming mechanism into which the screw is to be inserted with the hole on the shaft tube, and screw the screw firmly in.

4.Using a wrench, screw in the bolt

US-10

Page 9 Page 11
Page 10
Image 10
RedMax EXZ2460S-PH manual Set up
Page 9 Page 11

EXZ2460S-PH specifications

The RedMax EXZ2460S-PH is a powerful and innovative addition to the lineup of handheld outdoor power equipment. Designed primarily for professional landscaping and maintenance tasks, this versatile tool is engineered for efficiency, performance, and user comfort.

At the heart of the EXZ2460S-PH is a robust 24.5cc two-stroke engine, known for its reliability and fuel efficiency. This engine technology not only delivers impressive power but also enhances torque, ensuring that the performance meets the rigorous demands of landscaping professionals. The engine is designed with a reliable starting system, minimizing downtime and allowing users to get straight to work.

One of the standout features of the EXZ2460S-PH is its ergonomic design. The tool is fitted with a comfortable handle and a lightweight body, reducing user fatigue even during extended periods of use. This focus on comfort is complemented by a well-balanced design that allows operators to maneuver easily around obstacles, making trimming and pruning tasks more efficient.

The EXZ2460S-PH also incorporates advanced anti-vibration technology, which significantly reduces vibration transfer to the user’s hands. This technology promotes longer use without discomfort, making it ideal for both professionals and homeowners who require a reliable solution for yard maintenance.

Moreover, the RedMax EXZ2460S-PH is equipped with a high-capacity air filter that enhances air intake, resulting in improved engine performance. This filter is designed for easy maintenance, further contributing to the tool’s operational efficiency and lifespan.

Another notable characteristic is the tool's versatility. The EXZ2460S-PH can easily switch between different attachments, allowing users to tackle various tasks such as grass trimming, hedge cutting, and much more. This adaptability makes it an invaluable tool for landscape professionals who require multi-functionality in their equipment.

In terms of safety features, it boasts a throttle lock and a safety guard, ensuring that users can operate the machine with confidence.

In conclusion, the RedMax EXZ2460S-PH is a cutting-edge handheld tool that stands out for its powerful engine, ergonomic design, advanced technology, and versatility. It is engineered to meet the demanding needs of landscaping professionals, making it a valuable investment for anyone looking to elevate their outdoor maintenance tasks. With its combination of performance and comfort, the EXZ2460S-PH is poised to lead in the market of outdoor power equipment.
Top Page Image Contents