EXZ2460S-PH

8. Operation

IMPORTANT

The oil flow adjusting screw must be pressed in slightly in order to turn. Failure

3.When starting to edge, run the engine at full throttle, and slowly have the blade cut into the edge groove.

to do so could damage the pump and screw.

(1) Direction of rotation

NOTE

U S

3.With a screwdriver, push in on the oil flow rate adjusting screw and turn in the desired direction (there are three incremental settings):

(a)Clockwise-decrease lubrication.

(b)Counter clockwise-increase lubrication.

(c)Middle

•Before edging, make sure the area is soft enough so the blade does not bog down.

•Do not move the edger into the work so fast that the engine or blade bogs down.

(RMS-EX only)

■BREAK-IN OPERATION

HE-EX2 OP1

WARNING

•Always wear work gloves made of leather or some other sturdy material when using the polesaw.

•Falling branches may fall onto the face or into the eyes, resulting in injuries, scratches, and cuts, and for this reason you should always be sure to wear a helmet and face protector when using your polesaw.

(HE-EX2 only)

WARNING

•Always wear eye protection such as safety goggles. Never lean over the rotating cutting head. Rocks or other debris could be thrown into eyes and face and cause serious personal injury.

•Keep the blade guard and the mad guard attached in place at all times when the unit is operated.

•Before starting a job, check the area and remove all obstacles and objects that could be thrown by the blade.

•Do not adjust the wheel height or try to remove anything entangled to the blade with the engine running.

1.Before starting the engine, adjust the wheel height for desired cutting depth (See page 15).

2.Before starting a job, plan your direction of travel so that you can always hold the edger on you right side and can walk on a hard surface as much as possible.

RMS-EX OP1

The Properly Dressed Operator (OP1)

(1)ALWAYS wear hearing protective devices.

(2)ALWAYS wear eye protection such as goggles or safety glasses.

(3)ALWAYS wear a mask to protect against dust or other airborne particles.

(4)ALWAYS wear close fitting clothes. Gloves offer added protection and are strongly recommended. Do not wear clothing or jewelry that could get caught in machinery.

(5)ALWAYS wear leather or heavy- rubber shoes. NEVER work barefooted!

(6)BEWARE of thrown debris!

(7)DIRECTION OF ROTATION

•The RedMax Sweeper works best when its rubber fins can quickly slide or "skim" over the surface being swept.

•New or replacement sweeper belts tend to grip or drag on hard surfaces, and should be thoroughly broken in or "scuffed" before the broom is actually put to work.

•Break-in is easily accomplished by operating the RedMax Sweeper at full throttle for 3 to 5 minutes in loose gravel or similar abrasive material. Once broken in, a RedMax Sweeper will effortlessly move an amazing variety of materials, ranging from snow or standing water to heavier objects such as wood chips or gravel.

•Experience will help you understand the operating principles of the RedMax Sweeper, but safe operation must be practiced from the start.

US-21

Page 20 Page 22
Page 21
Image 21
RedMax EXZ2460S-PH manual Direction of rotation, BREAK-IN Operation HE-EX2 OP1, RMS-EX OP1, Properly Dressed Operator OP1
Page 20 Page 22

EXZ2460S-PH specifications

The RedMax EXZ2460S-PH is a powerful and innovative addition to the lineup of handheld outdoor power equipment. Designed primarily for professional landscaping and maintenance tasks, this versatile tool is engineered for efficiency, performance, and user comfort.

At the heart of the EXZ2460S-PH is a robust 24.5cc two-stroke engine, known for its reliability and fuel efficiency. This engine technology not only delivers impressive power but also enhances torque, ensuring that the performance meets the rigorous demands of landscaping professionals. The engine is designed with a reliable starting system, minimizing downtime and allowing users to get straight to work.

One of the standout features of the EXZ2460S-PH is its ergonomic design. The tool is fitted with a comfortable handle and a lightweight body, reducing user fatigue even during extended periods of use. This focus on comfort is complemented by a well-balanced design that allows operators to maneuver easily around obstacles, making trimming and pruning tasks more efficient.

The EXZ2460S-PH also incorporates advanced anti-vibration technology, which significantly reduces vibration transfer to the user’s hands. This technology promotes longer use without discomfort, making it ideal for both professionals and homeowners who require a reliable solution for yard maintenance.

Moreover, the RedMax EXZ2460S-PH is equipped with a high-capacity air filter that enhances air intake, resulting in improved engine performance. This filter is designed for easy maintenance, further contributing to the tool’s operational efficiency and lifespan.

Another notable characteristic is the tool's versatility. The EXZ2460S-PH can easily switch between different attachments, allowing users to tackle various tasks such as grass trimming, hedge cutting, and much more. This adaptability makes it an invaluable tool for landscape professionals who require multi-functionality in their equipment.

In terms of safety features, it boasts a throttle lock and a safety guard, ensuring that users can operate the machine with confidence.

In conclusion, the RedMax EXZ2460S-PH is a cutting-edge handheld tool that stands out for its powerful engine, ergonomic design, advanced technology, and versatility. It is engineered to meet the demanding needs of landscaping professionals, making it a valuable investment for anyone looking to elevate their outdoor maintenance tasks. With its combination of performance and comfort, the EXZ2460S-PH is poised to lead in the market of outdoor power equipment.
Top Page Image Contents