EXZ2460S-PH

8. Operation

(LRT-EX3 only)

WARNING

This product is equipped with extremely sharp blades, and when used improperly these blades can be extremely dangerous, and improper handling can cause accidents which may in turn lead to serious injury or death. For this reason, you should always be careful to follow the following instructions when using your trimmer.

•Never hold the trimmer in a way in which the blades are pointed towards someone else.

•Never allow the blades to come into proximity with your body while the engine of the trimmer is in operation.

•Always be sure to turn off the engine before changing the angle of the blades, removing branches which have become stuck in the blades, or at any other time when coming into close proximity with the blades.

•Always wear work gloves made of leather or some other sturdy material when using the trimmer.

•Always place the blade cover provided with the trimmer over the blades when not in use.

•Falling branches may fall onto the face or into the eyes, resulting in injuries, scratches, and cuts, and for this reason you should always be sure to wear a helmet and face protector when using your trimmer.

PS-EX OP1

(1)Clamp lever

(2)Trimming mechanism

(3)Tighten

(4)Loosen

(PS-EX only)

■CHECKING OIL SUPPLY

After starting the engine, run the chain at medium speed and see if chain oil is scattered off as shown in the figure. (OP1)

(1) Chain oil

NOTE

The oil reservoir has a capacity sufficient to provide about 40 minutes of cutting time (when set to deliver the minimum flow rate, or about as long as you'll get from a tank of fuel). Be sure to refill the oil tank every time when refueling the saw.

■ADJUSTING OIL FLOW RATE

WARNING

Never fill the oil reservoir nor adjust the oiler with the engine running.

IMPORTANT

An increase in bar oil flow rate will speed oil consumption, requiring more frequent checks on the oil reservoir. To ensure sufficient lubrication, It may be necessary to check the oil level more frequently than at fuel tank refills.

LRT-EX3 OP1

US-20

IMPORTANT

The thickness of branches which may be cut using this trimmer is limited to up to approximately 3/16" (5mm).

Never try to cut branches thicker than this, as doing so may result in damage to the trimmer.

■ADJUSTING THE ANGLE OF THE CUTTING BLADES (OP1)

1.Stop the engine.

2.Turn the bolt located on the top of the trimming mechanism counter-clockwise to loosen it.

3.Adjust the angle of the blades to the desired angle, and then fix the bolt firmly back into place.

PS-EX OP2

The guide bar and chain are lubricated automatically by a pump that operates whenever the chain rotates. The pump is set at the factory to deliver a minimum flow rate, but it can be adjusted in the field. A temporary increase in oil flow is often desirable when cutting things like hardwood or wood with a lot of pitch.

Adjust the pump as follows:

1.Stop the engine and make sure the stop switch is in the OFF position.

2.Place the unit on its side with the oil reservoir up. (OP2)

(1)Oil tank

(2)Chain cover

Page 19 Page 21
Page 20
Image 20
RedMax EXZ2460S-PH manual PS-EX OP1, Checking OIL Supply, Adjusting OIL Flow Rate, LRT-EX3 OP1, PS-EX OP2
Page 19 Page 21

EXZ2460S-PH specifications

The RedMax EXZ2460S-PH is a powerful and innovative addition to the lineup of handheld outdoor power equipment. Designed primarily for professional landscaping and maintenance tasks, this versatile tool is engineered for efficiency, performance, and user comfort.

At the heart of the EXZ2460S-PH is a robust 24.5cc two-stroke engine, known for its reliability and fuel efficiency. This engine technology not only delivers impressive power but also enhances torque, ensuring that the performance meets the rigorous demands of landscaping professionals. The engine is designed with a reliable starting system, minimizing downtime and allowing users to get straight to work.

One of the standout features of the EXZ2460S-PH is its ergonomic design. The tool is fitted with a comfortable handle and a lightweight body, reducing user fatigue even during extended periods of use. This focus on comfort is complemented by a well-balanced design that allows operators to maneuver easily around obstacles, making trimming and pruning tasks more efficient.

The EXZ2460S-PH also incorporates advanced anti-vibration technology, which significantly reduces vibration transfer to the user’s hands. This technology promotes longer use without discomfort, making it ideal for both professionals and homeowners who require a reliable solution for yard maintenance.

Moreover, the RedMax EXZ2460S-PH is equipped with a high-capacity air filter that enhances air intake, resulting in improved engine performance. This filter is designed for easy maintenance, further contributing to the tool’s operational efficiency and lifespan.

Another notable characteristic is the tool's versatility. The EXZ2460S-PH can easily switch between different attachments, allowing users to tackle various tasks such as grass trimming, hedge cutting, and much more. This adaptability makes it an invaluable tool for landscape professionals who require multi-functionality in their equipment.

In terms of safety features, it boasts a throttle lock and a safety guard, ensuring that users can operate the machine with confidence.

In conclusion, the RedMax EXZ2460S-PH is a cutting-edge handheld tool that stands out for its powerful engine, ergonomic design, advanced technology, and versatility. It is engineered to meet the demanding needs of landscaping professionals, making it a valuable investment for anyone looking to elevate their outdoor maintenance tasks. With its combination of performance and comfort, the EXZ2460S-PH is poised to lead in the market of outdoor power equipment.
Top Page Image Contents