Preparation
14
Setting up the base unit

Connecting the AC adaptor and

telephone line cord

Connect the telephone line cord until it
clicks into the base unit (A) and telephone
line socket (B). Connect the AC adaptor
cord by pressing the plug firmly (C).
LUse only the included Panasonic AC
adaptor PQLV207AL.
Note:
LThe AC adaptor must remain connected
at all times. (It is normal for the adaptor
to feel warm during use.)
LThe AC adaptor should be connected to
a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to
a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to
become disconnected.
LThe unit will not work during a power
failure. We recommend connecting a
corded telephone to the same telephone
line or to the same telephone jack using
a telephone double adaptor.
LThe unit is not designed to be used with
rotary (pulse dialling) services.
If you subscribe to an ADSL service
Please attach a noise filter (contact your
ADSL provider) to the telephone line
between the base unit and the telephone
line socket in the event of the following:
– Noise is heard during conversations.
– Caller ID features (page 36) do not
function properly.
Hook
(230-240 V AC,
50/60 Hz)
A
C
B
To socket
To socket
Noise filter
TG5961AL.book Page 14 Friday, June 9, 2006 5:44 PM