Making/Answering Calls
Making calls
Using the handset
1 Lift the handset and dial the phone number.
LTo correct a digit, press {CLEAR}.
2 Press {C} or {CALL}.
3 When you finish talking, press {OFF} or place the handset on the base unit or charger.
Note:
LThe IN USE indicator on the base unit lights when someone is talking on the handset or another phone.
Using the speakerphone
1 Lift the handset, dial the phone number, and press {s}.
LSpeak alternately with the other party.
2 When you finish talking, press {OFF}.
Note:
LUse the speakerphone in a quiet environment.
LTo switch to the receiver, press {C}.
Adjusting the receiver/speaker volume
Press {^} or {V} repeatedly while talking.
Making a call using the redial list
The last 10 phone numbers dialled are stored in the redial list.
1 {REDIAL}
2 Press {^} or {V} to select the desired number.
3 {C}
Note:
LThe caller’s name is not stored in the redial list when calling back from the caller list.
Erasing a number in the redial list
1 {REDIAL}
2 Press {^} or {V} to select the desired number. i{ERASE}
3 “Yes” i{SELECT} i{OFF}
PAUSE button (for PBX/long distance service users)
A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/or PIN in the phonebook, a pause is also needed (page 34).
For example, if you need to dial the line access number “9” when making outside calls with a PBX:
1 {9} i{PAUSE} iDial the phone number.
2 {C}
24
