RedMax EXZ2500S-BC manual 33 , Operation EX-PSonly, aClockwise-decreaselubrication

8. Operation (EX-PS only)

IMPORTANT

The oil flow adjusting screw must be pressed in slightly in order to turn. Failure to do so could damage the pump and screw.

3.With a screwdriver, push in on the oil flow rate adjusting screw and turn in the desired direction (there are three incremental settings):

(a)Clockwise-decrease lubrication.

(b)Counter clockwise-increase lubrication.

(c)Middle

WARNING

•Always wear work gloves made of leather or some other sturdy material when using the polesaw.

•Falling branches may fall onto the face or into the eyes, resulting in injuries, scratches, and cuts, and for this reason you should always be sure to wear a helmet and face protector when using your polesaw.

33 