4. For safe operation

1.Never operate a chain saw when you are fatigued, ill, or upset, or under the influence of medication that may make you drowsy, or if you are under the influence of alcohol or drugs.

2.Use safety footwear, snug fitting clothing and eye, hearing and head protection devices.

3.Always use caution when handling fuel. Wipe up all spills and then move the chain saw at least ten(10) feet(three(3)

m)from the fueling point before starting the engine.

3a) Eliminate all sources of sparks or flame (ie. smoking, open flames, or work that can cause sparks) in the areas where fuel is mixed, poured, or stored.

3b) Do not smoke while handling fuel or while operating the chain saw.

4.Do not allow other persons to be near the chain saw when starting the engine or cutting a wood. Keep bystanders and animals out of the work area. Children, pets, and bystanders should be a minimum of thirty(30) feet away when you start or operate the chain saw.

5.Never start cutting until you have a clear work area, secure footing, and planned retreat path from the falling tree.

6.Always hold the chain saw firmly with both hands when the engine is running. Use a firm grip with thumb and fingers encircling the chain saw handles.

7.Keep all parts of your body away from the saw chain when the engine is running.

8.Before you start the engine, make sure the saw chain is not contacting anything.

9.Always carry the chain saw with the engine stopped, the guide bar and saw chain to the rear, and the muffler away from your body.

10.Always inspect the chain saw before each use for worn, Ioose, or changed parts. Never operate a chain saw that is damaged, improperly adjusted, or is not completely and securely assembled. Be sure that the saw chain stops moving when the throttle control trigger is released.

11.All chain saw service, other than the items listed in the Operator’s Manual, should be performed by competent chain saw service personnel. (e.g., if improper tools are used to remove the flywheel, or if an improper tool is used to hold the flywheel in order to remove the clutch, structural damage to the flywheel could occur which could subsequently cause the flywheel to disintegrate).

12.Always shut off the engine before setting it down.

13.Use extreme caution when cutting small size brush and saplings because slender material may catch the saw chain and be whipped toward you or pull you off balance.

14.When cutting a limb that is under tension, be alert for spring back so that you will not be struck when the tension in the wood fibers is released.

15.Keep the handles dry, clean and free of oil or fuel mixture.

6

Page 5 Page 7
Page 6
Image 6
RedMax G310TS manual For safe operation
Page 5 Page 7

G310TS specifications

The RedMax G310TS is a highly versatile and efficient gas-powered string trimmer that comes equipped with advanced features to meet the needs of both professional landscapers and enthusiastic gardeners. Known for its exceptional performance and ease of use, the G310TS is designed to tackle various tasks from trimming grass along edges to maintaining larger lawns and gardens.

One of the standout characteristics of the G310TS is its powerful 30.5 cc engine, which delivers a robust performance while maintaining fuel efficiency. This lightweight engine allows for extended use without causing undue fatigue to the operator. The unit is designed with an ergonomic handle that provides comfort during prolonged use, enhancing user experience significantly.

The G310TS incorporates a straight shaft design, which offers the advantage of reaching difficult areas such as under bushes or around fences. This design not only improves maneuverability but also allows for better line of sight, helping users to achieve a cleaner cut. Additionally, the trimmer is equipped with a dual line head that provides efficient cutting capabilities, allowing operators to trim larger sections of grass in less time.

The RedMax G310TS features advanced technologies that enhance its usability and performance. The Easy Start system is designed to reduce the effort required to start the engine, making it particularly useful for those new to using power equipment or for long workdays. Furthermore, the trimmer’s anti-vibration system minimizes fatigue and strain on the hands and arms, allowing for greater comfort during operation.

Another key feature is the adjustable cutting height, which enables users to customize their trimming tasks according to the type of vegetation being cut. The durable construction of the G310TS ensures longevity, with high-quality materials that can withstand the rigors of professional use.

In summary, the RedMax G310TS combines power, efficiency, and user-friendly design, making it an ideal choice for anyone needing a reliable and effective string trimmer. With its robust engine, ergonomic features, and advanced technologies, it is well-suited for a wide range of landscaping tasks, ensuring that users can achieve professional results in their lawn care endeavors. Whether you are a seasoned professional or a weekend warrior, the G310TS is engineered to deliver excellent performance and operational ease.
Top Page Image Contents