Maintenance
■PROCEDURES TO BE PERFORMED AFTER
EVERY 50 HOURS OF USE
•Remove the muffler, insert a screwdriver into the vent, and wipe away any carbon buildup. Wipe
away any carbon buildup on the muffler exhaust vent and cylinder exhaust port at the same time.
• Tighten all screws, bolts, and fittings.
Storage
BEFORE STORING THE BLOWER:
1.Drain a fuel tank and push the primer bulb until it becomes empty of fuel.
2.Remove the spark plug and drop a spoonful of
Troubleshooting guide
Case 1. Starting failure
CHECK | PROBABLE CAUSES | ACTION |
fuel tank | ➞ | incorrect fuel |
fuel filter | ➞ | fuel filter is clogged |
carburetor adjustment screw ➞ | out of normal range | |
sparking (no spark) | ➞ | spark plug is fouled/wet |
| ➞ | plug gap is incorrect |
spark plug | ➞ | disconnected |
➞drain it and with correct fuel
➞clean
➞adjust to normal range
➞clean/dry
➞correct (GAP: 0.6~0.7mm)
➞retighten
Case 2. Engine starts but does not keep running/Hard
CHECK | PROBABLE CAUSES |
| ACTION |
fuel tank | ➞ incorrect fuel or staled fuel | ➞ drain it and with correct fuel | |
carburetor adjustment screw | ➞ out of normal range | ➞ adjust to normal range | |
muffler,cylinder (exhaust port) | ➞ carbon is | ➞ | wipe away |
air cleaner | ➞ clogged with dust | ➞ | wash |
When your unit seems to need further service, please consult with our RedMax service shop in your area.
14
