6. Set up
SE5
SE6
SE7
3.Place the blade between the cutter holders (A) and (B) while locking the gear shaft by putting the bar, one of the tools provided, through the key holes on the holder(A) and the gearcase. Use the socket and the screwdriver as shown in the picture below to tighten the blade mounting bolt. (SE5)
(1)Blade mounting bolt (Left-handed)
(2)Cutter holder (B)
(3)Blade
(4)Bar
(5)Cutter holder (A)
4.Split the bracket and install the wheel assembly to the shaft tube and clamp at a position best for your job. (SE6)
(1) Bracket
5.Install the
