Water continues to

This is normal.

 

 

flow when

The shower includes a shutdown feature that means the water will continue to

 

 

“ (stop)” selected

flow for up to 3 seconds after “ (stop)” has been selected.

 

 

 

 

 

 

Broken parts

Please contact our spares department on 08709 000420 (UK only).

 

 

 

Fitting instructions are provided with most spares

 

 

 

 

 

 

 

WHAT TO DO IF THINGS GO WRONG (2)

 

 

 

 

 

PROFESSIONAL SERVICE

If the previous “Self Help” checks fail to restore the performance, you should seek professional help.

The person who installed the shower is probably the best one to repair it and is certainly the person to contact if you have had a problem in the guarantee period.

The following additional checklist is provided for the benefit of the qualified service person.

WARNING: SWITCH OFF THE ELECTRICITY AT THE LOCAL ISOLATOR BEFORE REMOVING THE COVER TO MAKE CHECKS

Water too HOT

Water flow restricted by blockage in filter of solenoid valve.

 

Switch off water, loosen inlet connection to solenoid, remove filter in solenoid

 

with long nosed pliers and flush clean.

 

 

Water too COLD

Check circuit through thermal cut-out.

 

Check circuit through microswitches on the pressure switch.

 

Check each element circuit.

 

Check tightness of electrical connections.

 

 

No control over

Check Drive Gite is correctly engaged into Control Knob (see diagram.9)

water flow

Undo headworks of stabiliser valve.

 

Check stabiliser is in place and remove any debris in valve.

Water leaks from

Check for cause of high pressure and remove it.

burst pressure

Blockage on outlet e.g. blocked shower handset.

relief valve

Replace the pressure relief disc (not covered by guarantee).

 

 

Water does not

Check circuit through solenoid coil. If defective then replace.

flow when outer

Check circuit through microswitches. If defective then replace.

knob “A” is

Power supply not reaching shower.

turned.

 

 

 

REDRING AFTER SALES SERVICE

We offer a technical advisory service on the telephone to contractors and other customers with problems in the field.

RING 08709 000430 (UK ONLY)

RING YOUR LOCAL DEALER (Export Variants)

Some spare parts (see later section) can be supplied against Credit or Debit cards.

RING 08709 000420 (UK ONLY)

Remember to quote the exact type of shower, as written on the front of the shower and on this leaflet.

6

Page 5 Page 7
Page 6
Image 6
Redring 320S manual Redring After Sales Service, Professional Service, Ring 08709 000420 UK only
Page 5 Page 7

320S specifications

The Redring 320S is a compact, electric instant water heater that has gained popularity for its efficiency and convenience in providing hot water on demand. With a powerful output of 3 kW, it efficiently heats water instantly, making it an ideal solution for various applications in homes, offices, and other facilities.

One of the key features of the Redring 320S is its compact size. The unit is designed to be wall-mounted, ensuring that it does not take up unnecessary space in smaller areas such as kitchenettes or bathrooms. This compact design does not compromise performance, as it can deliver a consistent and reliable flow of hot water whenever needed.

The Redring 320S utilizes innovative heating technologies to achieve fast heating times. With its advanced heating element, the device can provide hot water at a rate of approximately 3 liters per minute. This means that users can enjoy a steady supply of hot water for tasks such as washing dishes, showering, or performing other daily routines without the wait associated with traditional storage water heaters.

Another characteristic that sets the Redring 320S apart is its energy efficiency. By operating only when hot water is needed, the unit minimizes energy consumption compared to conventional systems that continuously heat a storage tank. This results in lower energy bills and a more sustainable solution for hot water generation.

The device also comes equipped with user-friendly control features, allowing users to adjust the temperature settings easily. This personalization ensures that everyone can find their ideal water temperature, enhancing comfort and convenience.

Safety is a priority with the Redring 320S, which features built-in thermal cut-out protection. This technology prevents overheating and ensures that the device operates within safe temperature limits, providing peace of mind to users.

In conclusion, the Redring 320S is a versatile and efficient instant water heater that boasts a range of features designed to meet modern demands for hot water. Its compact design, rapid heating capability, energy efficiency, user-friendly controls, and safety features make it a standout choice for anyone in need of a reliable hot water solution. Whether in a home or commercial setting, the Redring 320S delivers performance and convenience that users can rely on.
Top Page Image Contents