Full details of terms and conditions are available on request from:-
APPLIED ENERGY PRODUCTS LIMITED
MORLEY WAY, PETERBOROUGH PE2 9JJ
TEL: +44 (0) 1733 456789
FAX: +44 (0) 1733 310606
Website: www.redring.co.uk
HOW TO USE YOUR ACTIVE 320S SHOWER (SUMMARY)
1.Ensure the electricity and water are turned on to the unit.
2.Turn outer knob “A” clockwise to the “Power Select” position of your choice.
The water will flow, and the neon indicator light will glow.
= High Power
= Medium Power
= Cold Shower
3.Turn inner knob “B” a small amount until you reach the desired showering temperature.
Turn
4.When you have finished showering, turn outer knob “A” 
” position. (You have no need to adjust inner knob “B”).
5.Water will continue to flow for up to 3 seconds before switching off. This reduces the temperature of the water in the tank for the next user.
The neon indicator light will go out.
6.Switch off the electricity supply at the ceiling switch or local isolator.
Notes
∙Wait 20 seconds for the temperature to stabilise after each adjustment.
∙The neon indicates when the heaters are on and, if the shower has been recently used, can take up to 20 seconds to come on.
During this time the water may go from very hot to cold before stabilising.
Also, please note that the neon indicator does not light when the shower is set to the
“
“ cold power setting.
12
