7.The shower is designed to have an open outlet and should only be used with ”Redring” recommended fittings.

Do not connect the handset until after the shower front cover and corner section are fitted.

WARNING: DO NOT FIT A TAP ON THE SHOWER OUTLET.

WARNING: TAKE CARE TO AVOID RESTRICTING THE OUTLET OF THE PRESSURE RELIEF DEVICE

c)ELECTRICAL

WARNING: THIS SHOWER MUST BE EARTHED.

The electrical installation must be in accordance with the current BS.7671 (IEE Wiring Regulations) and “Part P” of the Building Regulations and/or local regulations

1.The SHOWER is designed for a single phase AC electrical supply.

Please check the rating plate on the unit to see what details apply to your unit.

AS A GUIDE ONLY (* Only applies if external earth impedance is less than 0.35 Ohms)

Rating

Cable Sizes

Fuse / MCB

Cable Length

 

4.0mm²

32A Type B MCB

21m Max.

7.2 / 6.6kW 240 / 230V

6.0mm²

35m Max.

 

 

6.0mm²

40A Type B MCB

27m Max.

 

10.0mm²

45m Max.

 

 

 

 

 

 

 

6.0mm²

40A Type B MCB

27m Max.

 

10.0mm²

45m Max.

8.5 / 7.8kW 240 / 230V

 

6.0mm²

45A BS.1361 fuse

12m Max.*

 

 

10.0mm²

21m Max.*

 

 

 

 

 

 

 

6.0mm²

40A Type B MCB

27m Max.

 

10.0mm²

45m Max.

9.5 / 8.7kW 240 / 230V

 

6.0mm²

45A BS.1361 fuse

12m Max.*

 

 

10.0mm²

21m Max.*

 

 

 

 

 

 

Remember to upgrade the cable if it runs in thermal insulation in a loft, or for a longer distance.

2.A means for disconnection in all poles must be incorporated in the fixed wiring in accordance with the wiring rules.

We recommend a ceiling switch mounted in a convenient position.

3.Cut back cable as in diagram 7. Connect cable to terminal block making sure that all the retaining screws are VERY TIGHT and

that no cable insulation is trapped under the screws.

WARNING: FAILURE TO COMPLY WITH

THESE INSTRUCTIONS

COULD RESULT IN FAILURE

OF THE TERMINAL BLOCK

4.Re-Fit the corner section back into the backplate.

9

Page 9
Image 9
Redring 320S manual These Instructions Could Result in Failure Terminal Block

320S specifications

The Redring 320S is a compact, electric instant water heater that has gained popularity for its efficiency and convenience in providing hot water on demand. With a powerful output of 3 kW, it efficiently heats water instantly, making it an ideal solution for various applications in homes, offices, and other facilities.

One of the key features of the Redring 320S is its compact size. The unit is designed to be wall-mounted, ensuring that it does not take up unnecessary space in smaller areas such as kitchenettes or bathrooms. This compact design does not compromise performance, as it can deliver a consistent and reliable flow of hot water whenever needed.

The Redring 320S utilizes innovative heating technologies to achieve fast heating times. With its advanced heating element, the device can provide hot water at a rate of approximately 3 liters per minute. This means that users can enjoy a steady supply of hot water for tasks such as washing dishes, showering, or performing other daily routines without the wait associated with traditional storage water heaters.

Another characteristic that sets the Redring 320S apart is its energy efficiency. By operating only when hot water is needed, the unit minimizes energy consumption compared to conventional systems that continuously heat a storage tank. This results in lower energy bills and a more sustainable solution for hot water generation.

The device also comes equipped with user-friendly control features, allowing users to adjust the temperature settings easily. This personalization ensures that everyone can find their ideal water temperature, enhancing comfort and convenience.

Safety is a priority with the Redring 320S, which features built-in thermal cut-out protection. This technology prevents overheating and ensures that the device operates within safe temperature limits, providing peace of mind to users.

In conclusion, the Redring 320S is a versatile and efficient instant water heater that boasts a range of features designed to meet modern demands for hot water. Its compact design, rapid heating capability, energy efficiency, user-friendly controls, and safety features make it a standout choice for anyone in need of a reliable hot water solution. Whether in a home or commercial setting, the Redring 320S delivers performance and convenience that users can rely on.