5.
a.Ensure Knob “E” is aligned at the “6 o’clock” position.
b.In the main body of the shower, turn the “Drive Gite” fully clockwise until it is at the position shown. Please note that this instruction should be used if the “Drive Gite” becomes accidentally dislodged, whilst attention should also be paid to the position of the “Flow Mask alignment mark”.
c.Fit the front cover of the shower to the main body.
Ensuring that the knobs correctly engaged to their mating component.
d.Check that Knob “E” has been correctly aligned by turning
6.Replace the top and bottom fastening screws.
7.Fit the shower hose, and operate the shower first without the handset to flush out particles, fit the handset and then operate the shower as on page 3 or 12 and check:
a.That the water gets to a satisfactory temperature.
b.Water flow can be adjusted by Knob “E”.
c.Power selection operates in all 3 levels, giving a change in water temperature and that the power indicator lights function correctly.
d.Check again for leaks
e.That the holes in the shower handset are not blocked
8.DEMONSTRATE OPERATION TO USER
ADDITIONAL ACCESSORIES | SPARE PARTS |
|
|
Please Note:- The fitting of Spare Parts must be supervised by a suitably qualified person.
White 2 metre Shower Hose | Cat No. 83792578 | Front Cover | Cat No. 93597865 |
WRAS Water Isolating Valve | Cat No. 93792452 | Cat No. 93597850 | |
Chrome Standard Accessories | Cat No. 83595317 | Solenoid Valve | Cat No. 93590722 |
Chrome | Cat No. 83595318 | Cylinder | Cat No. 93795809 |
Chrome Premium Accessories | Cat No. 83595319 | Tank Clip | Cat No. 93590715 |
Curtain and Rail Pack | Cat No. 83792812 | PRV Washer | Cat No. 93795817 |
Curtain and Rail Pack with |
| Thermal | Cat No. 93597871 |
Cat No. 83792811 | PCB Assembly | Cat No. 93597876 | |
|
| Handset | Cat No. 93597866 |
|
| Height Adjuster | Cat No. 93597867 |
Additional accessories and spare parts can be supplied against any Credit or Debit cards from Redring Sales Hotline 08709 000420
10
