Reebok Fitness RBEX39010 manual Assembly

ASSEMBLY

Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

Assembly requires the included tools and your own adjustable wrench .

Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers to the quantity used in assembly. Note: Some small parts may have been pre-attached for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.

M6 Washer	M8 Split	M8 Flat	M8 Nylon	M10 Nylon
(25)–6	Washer (70)–4	Washer (18)–4	Locknut (56)–4	Locknut (45)–4
M4 x 16mm	M6 x 16mm	M8 x 19mm Button	M6 x 16mm Hex	M8 x 25mm Button
Screw (90)–4	Screw (85)–2	Bolt (43)–4	Screw (29)–4	Screw (27)–4
M6 x 38mm Hex		M10 x 75mm Carriage Bolt (72)–2
Screw (78)–4
	M10 x 82mm Carriage Bolt (63)–2

4