6.While another person holds the Console (4) near the Upright (2), connect the console wire harnesses to the Upper and Main Wire Harnesses (42, 43). Insert the excess wire downward into the Upright.
Attach the Console (4) to the Upright (2) with four
M4 x 16mm Round Head Screws (80). Be careful to avoid pinching the Wire Harnesses (42, 43).
7.Attach the Seat (9) and the Backrest Bracket (3) to the Seat Bracket (11) with four M6 x 42mm Button Screws (81) and four M6 Washers (44) as shown.
Start all four Button Screws before you tighten any of them.
8.Attach the Backrest (8) to the Backrest Bracket (3) with three M6 x 38mm Button Screws (72) and three M6 Washers (44). Start all three Button Screws before you tighten any of them.
6
6 | 4 |
| |
Avoid pinching and | |
damaging the wires. | |
| 42 |
80 |
|
80 |
|
| 43 |
2 | Console |
| Wire |
| Harnesses |
7 |
|
9 |
|
11 |
|
| 3 |
44 |
|
| 44 |
81 |
|
| 81 |
8 |
|
| 8 |
| 3 |
| 44 |
| 72 |
| 44 |
| 44 |
| 72 |
