Reebok Fitness RBTL06008.0 specs

5.Insert the tab on the other Handrail Bracket (42) into the indicated slot in the left Upright (84). Attach the Handrail Bracket with a Screw (3).

Slide a Handrail Cap (8) onto the lower end of a Handrail (20). Make sure that the Handrail Cap is oriented as shown.

Insert the top of the Handrail (20) into the left Upright (84), and slide the Handrail Cap (8) over the Handrail Bracket (42). Attach the top of the Handrail to the left Upright with two Handrail Bolts (64); start both Handrail Bolts but do not tighten them yet. Then, attach the Handrail to the Handrail Bracket with a Screw (3). Tighten the two Handrail Bolts. With the help of a sec- ond person, carefully raise the Uprights (84) to a vertical position.

6.Attach the Latch Housing (73) to the left Upright (84) with two Screws (3); start both Screws and then tighten them. Note: Make sure that the large hole in the Latch Housing is on the indicated side.

Locate the Latch Pin Assembly (21). Remove the knob from the pin. Make sure that the collar and the spring are on the pin. (Note: If there are two collars, place one on each side of the spring.) Next, insert the pin into the Latch Housing (73). Then, tighten the knob onto the pin.

See steps 1 and 3. Fully tighten the two Front Endcap Screws (14).

5	Slot
	Slot
	8
	3
	84
	42
3	64
	64
	20

6
Knob	84
Knob
73
3	Spring
3
Large	Collar
Large
Hole	Pin
	Pin
	21

7.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread- mill. Note: Extra hardware may be included. Keep the included hex key in a secure place; the large hex key is used to adjust the walking belt (see page 20).

If you purchase the optional chest pulse sensor (see page 17), follow the steps below to install the receiver included with the chest pulse sensor.

1.Make sure that the power cord is unplugged. Remove the indicated Screw (3) and the Access Door (76) from the back of the Console Base (85).

2.Connect the wire on the receiver (A) to the indicated wire extending from the Console Base (85). Hold the re- ceiver so the small cylinder is oriented as shown and is facing the Console Base. Attach the receiver to the plastic posts on the Access Door (76) with the two in- cluded small screws.

3.Make sure that no wires are pinched. Reattach the Access Door (76) with the Screw (3). Discard the other wires included with the receiver.

	Wire
85
		Small
76		Screws
76
	3
	Small
	Cylinder	A
		A

RBTL06008.0 specifications

The Reebok Fitness RBTL06008.0 is a versatile and robust piece of gym equipment designed for users aiming to enhance their fitness journey. This functional trainer offers a broad range of exercises that cater to various fitness levels, making it an excellent addition to any home or commercial gym setting.

One of the standout features of the RBTL06008.0 is its dual cable setup. This design allows users to perform a wide variety of exercises, from cable crossovers to tricep pushdowns and even bicep curls. The adjustable pulleys facilitate a full range of motion, enabling users to engage different muscle groups effectively. This versatility ensures that users can challenge themselves and keep their workouts fresh and exciting.

The construction of the RBTL06008.0 is another key highlight. It boasts a sturdy steel frame that provides exceptional stability and durability during workouts. The unit is designed to withstand intense training sessions, making it an ideal choice for both beginners and advanced fitness enthusiasts. Additionally, the high-quality finish adds to the machine's aesthetic appeal, allowing it to blend seamlessly into any gym environment.

Reebok has integrated innovative technologies into the RBTL06008.0 to enhance user experience and performance. The resistance settings are easily adjustable, allowing users to tailor their workouts according to their strength and fitness goals. This adjustability is crucial for progressive training, where incrementally increasing resistance is essential for muscle growth and endurance enhancement.

Comfort is also a significant consideration in the RBTL06008.0 design. The ergonomic grips are designed to provide a secure hold, reducing the risk of slippage during high-intensity exercises. This feature ensures that users can focus solely on their workout without the distraction of discomfort or instability.

One notable characteristic of the RBTL06008.0 is its space-efficient design. Unlike traditional bulky equipment, this functional trainer occupies minimal space, making it ideal for smaller gym areas. Despite its compact size, it does not compromise on functionality, offering a complete workout experience.

In conclusion, the Reebok Fitness RBTL06008.0 is an exceptional functional trainer that combines versatility, durability, and user-friendly features. Its dual cable system, high-quality construction, adjustable resistance, and ergonomic design make it a perfect choice for anyone looking to elevate their fitness routine. With the RBTL06008.0, users can enjoy a diverse range of exercises, ensuring their workouts remain engaging and effective. Whether you are building muscle, toning your body, or improving overall fitness, this functional trainer is designed to meet your needs and help you achieve your goals.

Reebok Fitness RBTL06008.0 manual See steps 1 and 3. Fully tighten the two Front Endcap Screws

Models: RBTL06008.0

See steps 1 and 3. Fully tighten the two Front Endcap Screws (14).

RBTL06008.0 specifications