Locate the Reed Switch (63) and the Magnet (46) on the left side of the Pulley (47). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8 in. (3 mm). If necessary, loosen the Screw (7), move the Reed Switch slightly, and then retighten the Screw. Reattach the Hood (not shown), and run the treadmill for a few minutes to check for a correct speed reading.

PROBLEM: The walking belt slows when walked on

1/8"

7

Top

View

63

47

46

SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 9.

b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both rear roller bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each edge of the walking belt 2 to 3 in. (5 to 7 cm) off the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

b

2–3 in.

Rear Roller Bolts

c. If the walking belt still slows when walked on, please see the front cover of this manual.

PROBLEM: The walking belt is off-center or slips when walked on

SOLUTION: a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left rear roller bolt clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the bolt counterclockwise 1/2 of a turn. Be careful not to over- tighten the walking belt. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is centered.

b. If the walking belt slips when walked on, first re- move the key and UNPLUG THE POWER CORD. Using the hex key, turn both rear roller bolts clock- wise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each edge of the walking belt 2 to 3 in. (5 to 7 cm) off the walking plat- form. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and care- fully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

a

b

PROBLEM: The incline of the treadmill does not change correctly

SOLUTION: a. With the key in the console, press one of the Incline buttons. While the incline is changing, re- move the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the maximum incline level and then return to the minimum level. This will recalibrate the incline system.

20

Page 19 Page 21
Page 20
Image 20
Reebok Fitness RBTL06008.0 manual Problem The walking belt slows when walked on Top View
Page 19 Page 21

RBTL06008.0 specifications

The Reebok Fitness RBTL06008.0 is a versatile and robust piece of gym equipment designed for users aiming to enhance their fitness journey. This functional trainer offers a broad range of exercises that cater to various fitness levels, making it an excellent addition to any home or commercial gym setting.

One of the standout features of the RBTL06008.0 is its dual cable setup. This design allows users to perform a wide variety of exercises, from cable crossovers to tricep pushdowns and even bicep curls. The adjustable pulleys facilitate a full range of motion, enabling users to engage different muscle groups effectively. This versatility ensures that users can challenge themselves and keep their workouts fresh and exciting.

The construction of the RBTL06008.0 is another key highlight. It boasts a sturdy steel frame that provides exceptional stability and durability during workouts. The unit is designed to withstand intense training sessions, making it an ideal choice for both beginners and advanced fitness enthusiasts. Additionally, the high-quality finish adds to the machine's aesthetic appeal, allowing it to blend seamlessly into any gym environment.

Reebok has integrated innovative technologies into the RBTL06008.0 to enhance user experience and performance. The resistance settings are easily adjustable, allowing users to tailor their workouts according to their strength and fitness goals. This adjustability is crucial for progressive training, where incrementally increasing resistance is essential for muscle growth and endurance enhancement.

Comfort is also a significant consideration in the RBTL06008.0 design. The ergonomic grips are designed to provide a secure hold, reducing the risk of slippage during high-intensity exercises. This feature ensures that users can focus solely on their workout without the distraction of discomfort or instability.

One notable characteristic of the RBTL06008.0 is its space-efficient design. Unlike traditional bulky equipment, this functional trainer occupies minimal space, making it ideal for smaller gym areas. Despite its compact size, it does not compromise on functionality, offering a complete workout experience.

In conclusion, the Reebok Fitness RBTL06008.0 is an exceptional functional trainer that combines versatility, durability, and user-friendly features. Its dual cable system, high-quality construction, adjustable resistance, and ergonomic design make it a perfect choice for anyone looking to elevate their fitness routine. With the RBTL06008.0, users can enjoy a diverse range of exercises, ensuring their workouts remain engaging and effective. Whether you are building muscle, toning your body, or improving overall fitness, this functional trainer is designed to meet your needs and help you achieve your goals.
Top Page Image Contents