Regency 510-994 Vertical termination with co-linearflex system, Gas Fireplaces, P33 Gas Fireplace

Gas Fireplaces

Vertical termination with co-linear flex system

The appliance must not be connected to a chimney flue serving a separate solid fuel burning appliance.

Masonry chimneys may take various contours which the flexible liner will accommodate. However, keep the flexible liner as straight as possible, avoid unnecessary bending.

The Air Intake pipe must be attached to the inlet air collar of the termination cap.

This appliance is designed to be attached to two 3” (76mm) co-linear aluminium flex running the full length of the chimney. See the Venting Arrangements for minimum and maximum heights.

Co-linear DV
Vertical Termination
Cap # 946-529
A maximum
of two certified
joiner kits
may be used
per length.	Flex Liner
#948-305
35 ft (11m)

Exhaust
Flue
Outer
Pipe
with Kit#
946-563
	Air Intake
Pipe Length
	Co-Linea
Rigid Pipe Adapter	Flex
	Adapter
# 510-994
	with Kit#
	946-563

45o Elbow

Inner Pipe

Adapter with Kit# 946-563

P33 Gas Fireplace

Required Parts:

Part #	Description
946-529	Co-linear DV Vertical Termination Cap
948-305	3” Flex - 35 ft.
946-563	Coaxial to Co-linear Adapter Kit
510-994	Rigid Pipe Adapter
58dva-E45	45º Elbow
Alternate Approved Caps
46dva-VC	Vertical Termination Cap
46dva-VCH	High Wind Cap
46dva-GK	3” Co-linear Adapter with flashing

30

VerticalHeight(feet)	(51mm)max.	8'(2.4m)Min.	30'(9.1m)Max.
	2’
		30”	(762mm)

Horizontal Distance (Feet)

The shaded area in the diagrams show the allowable vertical

terminations.

Gas Fireplaces

Please refer to Exterior Vent Terminations for

additional guidelines on vent locations.

August 2008 Product Specifications Book 37