Regency H15, H200, HI300, H25, H300, HI200, H35 manual gas fireplaces, gas fireplace inserts

gas fireplaces

43-1/4"

29-1/2" 31-1/4"

32-1/4"

Specifications		P36	P36 Deep
Maximum BTU	Natural Gas	30,000	30,000
	Propane	30,000	30,000
Turn Down to (BTU)	Natural Gas	15,500	15,500
	Propane	15,000	15,000
EnerGuide Rating	Natural Gas	62.7%	64.62%
(Canada only)	Propane	62.7%	64.62%
Efficiency	Natural Gas	82%	82%
	Propane	82%	82%

Corner Framing - Top View

F

E

Minimum Termination Center Line

	Header
	10" Dia. hole
1/2"	through wall for
	Flex or DuraVent
Drywall
	I
	G H
	F

Flush Framing - Front View

		Minimum height
	D	to combustible
C		material
	B
	A

Mantel Clearances - Side View

	12" Mantel	Drywall
	7-1/2" Mantel
	3-1/2"	Top nailing strip
N	Mantel
	O	Top standoffs
	P
J	Top
	louvers
to floor

Side view

Framing	P36	P36 Deep
A	36-1/4"	36-1/4"
B	36-1/4"	37-1/4"
C	12-3/4"	17"
D	46"	46-1/2"
E (corner)	60"	68"
F (corner)	42-7/16"	48"
Minimum Termination Center Line
	P36	P36 Deep
F	12-3/4"	17-1/8"
G	32-1/2"	32-1/2"
H	36"	37"
I	40-1/2"	40-1/2"
Mantel Clearances
	P36	P36 Deep
J	30-1/2"	30-1/2"
N	14"	14"
O	10"	10"
P	7"	7"

gas fireplace inserts

40-3/4" 1/4"-26

Specifications		U31	U32
Maximum BTU	Natural Gas	30,000	30,000
	Propane	27,500	30,000
Turn Down to (BTU)	Natural Gas	14,500	15,300
	Propane	13,700	15,000
EnerGuide Rating	Natural Gas	52.9%	57.17%
(Canada only)	Propane	48.07%	57.17%
Efficiency	Natural Gas	76%	76%
	Propane	77%	77%

	Minimum Fireplace Opening
		U31	U32
Width		26-1/2"	26-1/2"
Height		21"	22"
Depth		15"	14"

27-7/8"

* 4" hearth trim available for taller fireplace openings.

	B
D	F
C	H

AI

G

Clearances To Combustibles		U31 / U32
A	Side Wall	10"
B	Ceiling	47-1/2"
C	Mantel	17"
D	Mantel depth	12"
E	Alcove Width	48"
F	Max. Alcove Depth	36"
Non-Combustible Hearth Requirements
G	Hearth Thickness	0"
H	Hearth Depth	16"
I	Hearth Width	40"

NOTE: All product specifications are subject to change without notice. Before installing, refer to the relevant product manual for full and up to date information.

Color and tone variations are a natural result of the enameling process. Actual colors may not appear exactly as shown.

U31: Tested to the following standards: GAS FIRED VENTED ROOM HEATER

TESTED TO: ANSI Z21.88a-1998/CSA 2.33a-M98, CAN 1-2.1-M86, CAN/CGA 2.17-M91. Certified for Canada and the US.

U31 is bedroom and alcove approved.

U32: Tested to the following standards: GAS FIRED VENTED ROOM HEATER

TESTED TO: ANSI Z21.88-1998/CSA 2.33-M98, CAN /CGA 2.17-M91. Certified for Canada and the US.

U32 is bedroom, alcove and mobile home approved.

All products tested to the following standards: GRAVITY DIRECT VENT WALL FURNACE TESTED AND APPROVED FOR U.S.A. AND CANADA TO:

E

CAN/CGA-2.17-M91, ANSI Z21.88b-1999/CSA 2.33b-M99.

15