REMOTE CONTROL CONTINUED (OPTIONAL)
3.After you have preset the code selectors, insert the terminal connector from the fan motor into the terminal connector inside the receiver (Fig. 2). The terminal plug can only be inserted one way to prevent improper connection.
SWITCH HOUSING RECEIVER | FAN’S SWITCH HOUSING HUB |
|
|
ANTENNA
FIG. 2
TERMINAL CONNECTOR
4.Insert the antenna wire through one of the small holes in the switch housing hub.
(Fig. 3) For best reception of the transmitter’s signal the antenna should be fully extended outside of the switch housing.
MOUNTING HUB
ANTENNA
FIG. 3
5.Secure the receiver housing to the mounting hub by sliding the housing onto the 3 screws on the hub and turning clockwise. Tighten the 3 screws when in place.
11